KSL1700XMGI4 Four-Chamber High-Temperature Box Furnace with Independent 1700°C Control, 120x120x120mm Chambers
The KSL1700XMGI4 is designed to facilitate simultaneous heat treatment of multiple samples under distinct temperature conditions, ideal for research environments requiring efficient phase diagram exploration or material synthesis. Its four separate box furnace chambers, each measuring 120 mm cubed, allow independent temperature control up to 1700°C, enabling parallel processing without cross-interference.
Each chamber is lined with high-purity alumina fiber insulation coated with an alumina layer to improve thermal efficiency and durability. Heating is provided by silicon carbide elements, ensuring rapid heating rates up to 10°C per minute. The furnace employs B-type thermocouples for precise temperature measurement, and a touchscreen PID control system offers programmable 50-stage temperature profiles with ±1°C accuracy. Communication with external computers is supported via a DB9 port and dedicated software.
주요 기능
- Four independent heating chambers with separate temperature control
- Maximum temperature of 1700°C per chamber, continuous operation at 1600°C
- Compact footprint for efficient laboratory space utilization
- High-purity alumina fiber insulation with alumina coating for enhanced heating efficiency
- Silicon carbide heating elements for rapid temperature ramp-up
- Touchscreen PID controller with 50 programmable stages and ±1°C accuracy
- DB9 PC communication port for external monitoring and control
기술 사양
| Chamber Size | 120 × 120 × 120 mm |
|---|---|
| 최고 기온 | 1700°C (up to 30 minutes), continuous 1600°C |
| Heating Element | Silicon carbide |
| Insulation | High-purity alumina fiber with alumina coating |
| 온도 제어 | Touchscreen PID controller, 50 programmable stages, ±1°C accuracy |
| Thermocouple Type | B-type |
| Heating Rate | ≤10°C/min |
| 전력 | 10 kW |
| 전압 | AC 220 V ±10%, 50/60 Hz, single-phase |
| 무게 | Approx. 250 lb (113.4 kg) |
대표적인 적용 분야
This furnace is suited for high-throughput thermal processing tasks such as sintering, annealing, and phase diagram studies of advanced materials. Its multi-chamber design supports simultaneous experiments under different temperature regimes, enhancing productivity in research labs focused on ceramics, metals, and electronic materials development.
구성 및 작동 안내
- Optional maximum temperature upgrade to 1750°C available at additional cost
- Do not operate with flammable, explosive, or toxic gases unless proper safety measures are implemented by the user
- Recommended to use on dedicated power supply within ±8% voltage variation; avoid proximity to high magnetic field equipment
- Insulation and heating elements are consumables; cracks in insulation during use are normal and repair kits are available
- Do not open furnace door when temperature exceeds 500°C to avoid damage and safety hazards
