YLJ-HP1818V Hydraulic Flat Hot Press with Dual Digital Temperature Controllers, 25T Force, 18″×18″ Heated Platens
The YLJ-HP1818V is engineered to meet demanding laboratory and industrial requirements for hot lamination and pressing of materials requiring controlled heat and pressure. It is particularly suited for applications such as composite bonding, film lamination, and sample preparation where uniform temperature and precise force application are critical.
This model incorporates a manually operated hydraulic system capable of exerting up to 25 metric tons (250 kN) of pressing force. The press features two large 18″ × 18″ hardened steel platens with CNC-ground flat surfaces, each equipped with independent digital temperature controllers allowing precise temperature regulation up to 205°C for continuous operation and short-term peaks to 250°C. Higher temperature capabilities up to 400°C are available upon request as a custom option.
Key Features
- Manually operated hydraulic press delivering up to 25 tons (250 kN) of force
- Two independently heated 18″ × 18″ hardened steel platens with CNC-ground flat finish
- Dual digital temperature controllers with auto-tuning and ±1°C accuracy
- Maximum continuous operating temperature of 205°C, with short-term capability to 250°C
- Pressure gauge with ±1.25 kN accuracy for precise force monitoring
- Maximum platen travel distance of 5″ (125 mm) for accommodating various sample thicknesses
- Optional higher temperature capability up to 400°C available on request
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | YLJ-HP1818V |
| Press Type | Manually operated hydraulic press |
| Maximum Pressing Force | 25 metric tons (250 kN) |
| Voltage | 220 VAC ±10%, 50/60 Hz |
| Power Consumption | 7,000 W max. (requires 40 A breaker) |
| Heated Platen Size | 18″ × 18″ (optional 10″ × 10″ available) |
| Platen Material | Hardened steel with CNC-ground flat finish |
| Maximum Travel Distance | 5″ (125 mm) |
| Maximum Working Temperature | 205°C continuous, 250°C for less than 30 minutes (up to 400°C optional) |
| Heating Rate | Approximately 5°C/min (10°F/min) |
| Temperature Control | Two digital controllers with auto-tuning, ±1°C accuracy, independent platen control |
| Pressure Gauge Accuracy | ±1.25 kN |
| Certifications | CE Certified |
Typical Applications
Ideal for laboratory-scale lamination, composite material bonding, film pressing, and sample preparation requiring controlled heat and pressure. Suitable for research and development in materials science, electronics, and polymer processing.
Configuration & Operating Notes
The press is manually operated via an oil pump; an electrically operated hydraulic version is available as an option at additional cost. The dual temperature controllers allow independent setting of each platen to accommodate different process requirements. Users should ensure proper electrical supply and breaker rating. Optional platen sizes and higher temperature capabilities can be customized to specific needs. Safety precautions should be observed when operating at elevated temperatures and high pressures.
