MSK-110D Hydraulic Disassembling Machine for CR20XX Coin Cells
The MSK-110D is engineered to facilitate the careful disassembly of common coin cells such as CR2032, CR2025, and CR2016, enabling researchers to access and analyze internal materials without causing damage. This capability is essential for battery research and development, where preserving the integrity of cell components during teardown is critical for accurate material study.
This machine operates hydraulically with a maximum pressing force of 8 metric tons and features an automatic return mechanism. It is designed for use outside of glove boxes and includes a consumable PTFE anti-corrosion die set that prevents short circuits during the disassembly process. Optional dies are available to accommodate larger coin cell sizes such as CR2325 and CR2450, enhancing the machine’s versatility.
Key Features
- Hydraulic pressing system with up to 8 metric tons force and automatic return.
- Standard die set for CR2032, CR2025, and CR2016 coin cells included.
- Optional die sets available for larger coin cells such as CR2325 and CR2450.
- PTFE anti-corrosion die core prevents short circuits during disassembly.
- Heavy-duty steel platform construction ensures stability and durability.
- CE certified for compliance with safety standards.
- Includes a commercial-grade aluminum tray to contain any oil leaks and maintain a clean workspace.
Technical Specifications
| Parameter | Specification |
|---|---|
| Maximum Pressure | 8 metric tons hydraulic pressure with automatic return |
| Standard Disassembling Dies | For CR2032, CR2025, CR2016 coin cells |
| Optional Dies | Available for CR2325, CR2450, and other special sizes |
| Die Material | PTFE anti-corrosion core |
| Machine Structure | Heavy-duty steel platform |
| Certification | CE Certified |
| Additional Included Item | 13″ x 9″ 12-gauge aluminum tray for oil containment |
Typical Applications
The MSK-110D is ideal for battery research laboratories focusing on coin cell teardown and material analysis. It supports disassembly of various coin cell sizes used in battery development, quality control, and failure analysis. The machine is particularly useful for studies requiring intact internal components for further examination.
Configuration & Operating Notes
The hydraulic pump is designed for disassembly pressures up to approximately 50–80 Kg/cm² and will automatically release pressure beyond this range to protect the system. Users can access an over-pressure limit screw by removing the front panel for adjustment. The included PTFE die is consumable and should be replaced as needed to maintain performance. Cleaning the die with ethanol after each use is recommended to prevent corrosion from electrolytes. The machine is intended for use outside of cleanrooms and glove boxes; consult cleanroom experts before use in controlled environments. Use of MTI branded coin cell cases is advised to ensure optimal crimping and disassembly quality.
