YLJ-HP100-XX 24T Laminating Hot Press with Dual Digital Temperature Controllers, 135×135 mm Heated Platens, Up to 750°C
The YLJ-HP100-XX hot press is engineered for laboratory lamination tasks requiring controlled heat and pressure, such as preparing polymer composites, ceramic samples, and solid-oxide electrolyzer cells (SOEC). This model integrates a 24-ton hydraulic press with two independently controlled heated platens, enabling precise temperature management during pressing processes.
The platens measure 135 x 135 mm and are constructed from hardened Cr12MoV alloy for the 500°C version or SS310 alloy for the 750°C version, both featuring CNC-ground flat surfaces with less than 0.05 mm parallelism deviation and surface roughness below 2 microns. Water cooling jackets are incorporated to facilitate rapid cooling of the heated plates, supporting continuous operation at elevated temperatures.
주요 기능
- Hydraulic press with separated pump and cylinder for easy maintenance and manual operation.
- Maximum pressing force of 24 tons with a pressure gauge calibrated to ±1.5 tons accuracy.
- Dual digital temperature controllers with 30-segment programmable profiles and ±2°C accuracy.
- Heated platens capable of continuous operation at 450°C (500°C for short durations) or up to 750°C version available on request.
- Water cooling system with two 1/4″ connectors for efficient platen temperature control.
- Maximum sample thickness accommodated: 58 mm.
- Power supply requirement: 208-240 VAC, 50/60 Hz, single phase, max 2.5 kW.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Maximum Force | 24 Tons |
| Platen Area | 135 x 135 mm |
| Platen Material | Cr12MoV alloy (500°C version), SS310 alloy (750°C version) |
| Surface Flatness | Parallelism < 0.05 mm within 10″ x 10″ area |
| Surface Roughness | Less than 2 microns |
| Max Travel Distance | 58 mm |
| Max Working Temperature | 450°C continuous (500°C for <30 min) with water cooling; 750°C version optional |
| Heating/Cooling Rate | Up to 5°C/min |
| 온도 제어 | Two digital controllers, 30 programmable segments, ±2°C accuracy |
| Power Supply | 208-240 VAC, 50/60 Hz, single phase, max 2.5 kW |
| Pressure Gauge Accuracy | ±1.5 Tons |
| Water Cooling | Two 1/4″ water pipe connectors; external water chiller required |
대표적인 적용 분야
The YLJ-HP100-XX is ideal for lamination and pressing tasks in materials research, including polymer and ceramic sample preparation, and fabrication of solid-oxide electrolyzer cells (SOEC). Its precise temperature and pressure control make it suitable for advanced materials development requiring uniform heat and force application.
구성 및 작동 안내
The hydraulic pump and cylinder are designed as separate units for ease of maintenance. Manual operation is standard, with an optional electric hydraulic pump available for automatic pressure control. The system requires connection to an external water chiller (not included) for platen cooling. Users should ensure sample thickness does not exceed 58 mm and avoid exceeding the maximum piston travel of 80 mm. The pressure gauge reading differs from actual sample pressure and should be interpreted accordingly. This hot press can be operated inside gloveboxes with inert gases such as argon or nitrogen.
