Product Overview
The VGM-50-AM is a programmable vertical impact mill for crushing and fine grinding of sintered ceramic samples. A separate touchscreen controls milling speed, processing time, and cooling intervals. The mill is compatible with argon-filled gloveboxes.
주요 기능
- Manual and automatic operation.
- Manual and pneumatic jar holders.
- Optional robotic jar handling and RS485 multi-unit control.
기술 사양
| 매개변수 | 사양 |
|---|---|
| 모델 | VGM-50-AM |
| Power Supply | 110–240 V AC, 50/60 Hz, single-phase |
| Maximum Power | 400 W |
| Motor Voltage | 24 V DC |
| Vibration Frequency | 300–1,600 cycles/min |
| Vibration Amplitude | 16 mm |
| Time Setting | 1–6,553 seconds |
| Standard Grinding Jar | 90 mL airtight zirconia jar |
| Control | Separate touchscreen; programmable milling, cooling intervals, and speed |
| Pneumatic Fixture Pressure | 0.4 MPa (4 bar) |
| Reported Output Fineness | Approximately 0.1–5 μm, depending on material and processing conditions |
