PTL-VM2 Vacuum Programmable Dip Coater with Touch Screen Controller
The PTL-VM2 is engineered for laboratory applications requiring uniform thin film deposition on small substrates under controlled vacuum environments. It accommodates samples up to 1 inch diameter and 3 inches length, which are dipped into coating solutions contained within a vacuum-sealed quartz tube. This setup minimizes contamination and evaporation, ensuring high-quality coatings.
The device integrates two DC motors within a rigid aluminum frame to provide precise vertical dipping and sample rotation. The dipping and pulling speeds are programmable from 1 to 200 mm/min with an accuracy of ±0.05%, controlled via a user-friendly color touch screen interface. The vacuum chamber consists of a 50 mm outer diameter quartz tube sealed with a stainless steel flange, allowing vacuum levels down to 10⁻⁵ torr with a turbopump.
주요 기능
- Vacuum-sealed quartz tube chamber (50 mm OD x 44 mm ID x 300 mm L) for contamination-free dip coating.
- Programmable dipping and pulling speeds from 1 to 200 mm/min with ±0.05% accuracy.
- Sample rotation capability integrated with dipping mechanism for uniform coating.
- Color touch screen controller for easy programming of speed, rotation, dwell time, and cycle count.
- Vacuum levels achievable: 10⁻² torr with mechanical pump, 10⁻⁵ torr with turbopump (optional).
- Sample holder supports substrates up to 75 mm length, 25 mm width, and 2.5 mm thickness, max 250 g weight.
- Universal power adapter included (100-240 VAC input, DC 24V output, max 90W).
기술 사양
| 매개변수 | 사양 |
|---|---|
| Quartz Tube Dimensions | 50 mm OD x 44 mm ID x 300 mm Length |
| Vacuum Sealing | SS304 flange with KF 25 port and needle valve for gas inlet |
| Vacuum Level | 10⁻² torr (mechanical pump), 10⁻⁵ torr (turbopump, optional) |
| Dipping/Pulling Speed Range | 1 to 200 mm/min ±0.05% |
| Dipping/Pulling Distance | 75 mm |
| Moving Distance | 100 mm |
| Dwell Time | Up to 999 seconds |
| Cycle Count | Up to 20 cycles |
| Sample Holder Capacity | Max 75 mm (L) x 25 mm (W) x 2.5 mm (T), max 250 g |
| Power Supply | DC 24 V, max 90 W; universal adapter 100-240 VAC input included |
| Control Interface | Color touch screen digital controller |
대표적인 적용 분야
Ideal for research and development of thin film coatings on small substrates, especially where vacuum conditions improve film quality and reduce contamination. Suitable for coatings involving nanoparticles, polymers, or other solution-based materials requiring controlled dipping and rotation.
Can be integrated with plasma cleaners for substrate surface treatment and ultrasonic processors for solution homogenization to enhance coating uniformity.
구성 및 작동 안내
The quartz tube can be inserted into a temperature-controlled furnace for high-temperature dip coating up to 1000°C (optional). Vacuum pumps are sold separately to achieve desired vacuum levels. Customized sample holders are available upon request to accommodate different substrate sizes or shapes.
Users should ensure proper vacuum sealing and monitor vacuum levels during operation. Plasma cleaning and ultrasonic dispersion of coating solutions are recommended preparatory steps for optimal film quality.
