MSK-HRP-3-E Hot Rolling Press with Dual Independent Temperature Control up to 230°C and 10 Ton Pressure Capacity
The MSK-HRP-3-E hot rolling press is engineered for laboratory-scale calendaring and lamination tasks, particularly suited for battery electrode fabrication and similar thin film processing. It enables precise thickness control and uniform heating, essential for achieving consistent material properties in layered structures.
This rolling press incorporates two independently controlled rollers, each heated up to 230°C with programmable temperature controllers. The adjustable roller gap ranges from 0 to 6 mm, allowing fine tuning of the rolling thickness. Pressure is applied manually via a hydraulic pump, capable of exerting up to 10 metric tons, accommodating a variety of material hardness and thickness requirements.
주요 기능
- Dual programmable temperature controllers for independent roller heating up to 230°C
- Manual hydraulic pressure application up to 10 metric tons for versatile pressing force
- Adjustable roller gap from 0 to 6 mm with micrometer precision (0.01 mm accuracy)
- Rollers constructed from Cr-plated high-quality tool steel with surface hardness HRC 60-62
- Selectable rolling direction (back and forth) for easy material handling and return
- Linear roller speed adjustable between 5 and 58 mm/sec with speed display
- CE certified with optional UL, TUV, or CSA certification available
기술 사양
| 매개변수 | 사양 |
|---|---|
| 모델 | MSK-HRP-3-E |
| Roller Diameter | 200 mm (8″) |
| Roller Width | 250 mm (10″) |
| Roller Surface Hardness | HRC 60-62, Cr plated |
| Roller Gap Adjustment | 0 to 6 mm, 0.01 mm accuracy via digital micrometers |
| Pressure Application | Manual hydraulic pump, up to 10 metric tons |
| 온도 제어 | Two independent controllers, max 230°C (less than 1 hour), ±2°C accuracy |
| Recommended Heating Rate | ~3°C per minute |
| Roller Linear Speed | Adjustable 5 – 58 mm/sec (displayed speed 0 – 40 mm/sec, actual speed = displayed × 1.5) |
| Power Supply | AC 208 – 240 V, single phase, 50/60 Hz, 4200 W total |
| Certifications | CE certified; UL, TUV, CSA optional at extra cost |
대표적인 적용 분야
Ideal for calendaring and lamination of battery electrodes, thin films, and layered materials requiring precise thickness control and uniform heating. Suitable for research and development in battery manufacturing and materials science.
구성 및 작동 안내
The press includes two digital micrometers for precise roller gap measurement and a manual hydraulic pump for pressure application. An optional electric hydraulic pump is available to maintain constant pressure automatically. Users should avoid rolling materials harder than 50 HRC to prevent damage. Multi-step thickness reduction is recommended for calendaring, with increments of approximately 0.02 mm per pass. Roller surfaces should be cleaned after each use, preferably with acetone, to prevent corrosion and maintain performance.
