MSK-AFA-MC200 Small Roll-to-Roll Coater with Optional Blade, Slot Die, Micro Gravure Coating and Laminating
The MSK-AFA-MC200 is engineered for laboratory-scale roll-to-roll coating and calendaring applications, enabling precise deposition of thin films onto flexible substrates such as copper, aluminum, PET, PP, and PE films. It addresses the need for adaptable coating processes by accommodating various coating heads and drying mechanisms, making it suitable for research and development of advanced coatings and laminations.
This system supports doctor blade, slot die, and micro gravure coating heads, each optimized for different coating thickness ranges and slurry viscosities. The coater also offers optional drying solutions including convection heating, infrared heating, and UV curing, allowing customization based on the coating material and process requirements. Additionally, lamination and calendaring modules can be integrated to enhance film properties and coating density.
주요 기능
- Supports multiple coating heads: doctor blade (10–200 µm), slot die (1 µm precision, up to 200 µm thickness), and micro gravure (2–3 µm thin coatings).
- Coating width up to 180 mm and length up to 5000 mm on a single side.
- Optional drying mechanisms: convection heating (up to 150°C), infrared heating, and customizable UV curing.
- Includes precision tension roller (~1 N) and alignment device for stable film handling.
- Integrated MSK-155 auto-slurry feeder with 2-liter tank included for doctor blade and micro gravure coatings.
- Optional slurry feeding screw pump (MSK-156) and economic slot die feeder (MSK-151-L500) available for slot die coating.
- Optional lamination and calendaring units with micrometer thickness adjustment (0.5–2 mm) and heatable rollers (up to 100°C) for enhanced film finishing.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Power Supply | 208–240 VAC, 50/60 Hz, Single Phase, 7 kW (40A breaker required) |
| Compressed Air | 0.5–0.8 MPa (air compressor not included; two-stage regulator required if using gas cylinder) |
| Maximum Reel Diameter | 250 mm O.D. |
| Coating Width & Length | Up to 180 mm W x 5000 mm L (single side) |
| Doctor Blade Coating Thickness | 10–200 µm |
| Micro Gravure Coating Thickness | 2–3 µm thin coatings |
| Slot Die Coating Thickness & Precision | 1 µm minimum dried film thickness, ±1% precision; up to 200 µm thick coatings |
| Typical Slurry Viscosity Range | Doctor Blade: 500–10,000 mPa·s; Slot Die: 1,000–8,000 mPa·s; Micro Gravure: 30–2,000 mPa·s |
| Drying Temperature | Up to 150°C (convection and infrared heating) |
| Drying Heater Length | 500 mm |
| Laminator Roller Size | Φ150 x 200 mm; rubber top roller, chromium-plated stainless steel bottom roller |
| Calendering Roller Size | Φ150 x 200 mm; chromium-plated stainless steel rollers, hardness ≥ HRC60 |
| Thickness Adjustment Range (Lamination/Calendering) | 0.5–2 mm with dual micrometer |
| Certifications | CE certified; UL/MET/CSA certified electric components; NRTL or CSA optional |
대표적인 적용 분야
Ideal for research and development of thin film coatings in battery electrode fabrication, flexible electronics, membrane coatings, and other advanced material coatings requiring precise thickness control and uniformity on flexible substrates.
구성 및 작동 안내
The system includes a precision tension roller and alignment device to maintain stable substrate handling; these can be omitted to reduce cost if not required. The MSK-155 auto-slurry feeder is standard with doctor blade and micro gravure heads. For slot die coating, the MSK-156 slurry feeding screw pump with 4-liter tank is optional and recommended for intermittent coating modes, while the MSK-151-L500 feeder is an economical option for continuous coating.
When using a gas cylinder instead of an air compressor, a two-stage pressure regulator must be installed to ensure safe operation within the required air pressure range. The final coating thickness depends on multiple parameters including slurry viscosity, solid content, shim thickness, and coating speed, so precise thickness guarantees require detailed slurry specifications.
Optional lamination and calendaring units can be integrated for enhanced film finishing, with heatable rollers available upon request. Technical training and on-site support are offered to facilitate optimal system operation.
