STX-203 Automatic Precision Diamond Wire Saw with Digital Control and Protective Chamber
The STX-203 is engineered for laboratory applications requiring precise, low-stress cutting of small, hazardous, or radioactive samples. It accommodates samples up to 2 inches (50 mm) in diameter or thickness, providing ultra-thin sectioning capabilities down to 0.08 mm. The saw operates within a sealed protective chamber to prevent contamination from hazardous dust generated during cutting.
This model integrates a digital control panel located outside the chamber, allowing operators to set cutting parameters and monitor the process safely. A digital microscope with 10x to 200x magnification and wireless monitor facilitates precise sample positioning before cutting. The motorized sample stage offers two-dimensional movement (Y and Z axes) with 360° horizontal rotation and ±10° tilt for flexible sample orientation.
주요 기능
- Protective chamber design minimizes contamination from hazardous or radioactive dust.
- Digital control panel and color touch screen enable precise adjustment of wire travel speed, feed speed, and cutting width.
- Digital microscope with wireless monitor supports accurate initial cut positioning with magnification from 10x to 200x.
- Pneumatic wire tension system with digital pressure regulator maintains stable tension for wires ranging from 0.12 mm to 0.5 mm diameter.
- Motor-driven Y-Z stage with 63 mm Z-axis and 50 mm Y-axis travel, including 360° rotation and ±10° tilt.
- Ultra-thin sectioning capability down to 0.08 mm thickness for delicate sample preparation.
- Includes one spool of 0.35 mm diameter diamond wire (20 m length) and a diamond blade dressing stone for wire maintenance.
- Water pump included for cooling the diamond wire during cutting; requires use of anti-corrosive oil or radiator water as coolant.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Maximum Sample Size | Up to 2″ (50 mm) diameter or square, max thickness 50 mm |
| 최대 표본 중량 | 4 kg |
| Cutting Width and Length | 50 mm x 60 mm max |
| Cutting Depth | 0.1 mm to 50 mm |
| Feed Speed | 0.01 mm/min to 40 mm/min, adjustable |
| Back Speed | 1 mm/min to 100 mm/min, adjustable |
| Spooler Spin Speed | 2 to 300 RPM, up to 2 m/s |
| Positional Accuracy | ±0.01 mm |
| Wire Diameter Range | 0.12 mm to 0.5 mm |
| Wire Length | 45 meters total; 20 meters per spool included |
| Microscope Magnification | 10x to 200x, Li-ion battery powered, wireless monitor |
| Stage Travel | Z-axis 63 mm, Y-axis 50 mm, 360° rotation, ±10° tilt |
| Power Supply | 110 VAC or 220 VAC ±10%, 50 Hz, max 300 W |
대표적인 적용 분야
Ideal for cutting toxic, hazardous, or radioactive samples requiring contamination control. Suitable for ultra-precise sectioning of meteorites, brittle crystals, non-ferrous alloys, epoxy, plastics, and other delicate materials up to 2″ diameter or 50 mm thickness.
구성 및 작동 안내
The saw includes one spool of 0.35 mm diameter diamond wire and a diamond blade dressing stone for maintaining wire sharpness. A water pump is provided for cooling the wire during cutting; users must supply anti-corrosive oil or radiator water as coolant to prevent rust. Use of proper cutting fluid is mandatory to avoid damage and corrosion. The pneumatic tension system requires an air compressor; a digital pressure regulator is optional for precise tension control.
Operators should clean the machine thoroughly after each use, especially when using water-based coolants. Regular lubrication of the motor shaft and application of anti-wear hydraulic oil before initial use and every 150 hours of operation is recommended. For cutting sticky materials, frequent wire sharpening using the dressing stone is advised.
