KSL-1700X-SJ Bench-Top High Temperature Furnace with Evaporating Particle Collection
The KSL-1700X-SJ furnace is engineered for laboratory applications that demand stable high-temperature environments combined with particle filtering capabilities. Its compact bench-top design accommodates materials processing within an 8 inch by 8 inch by 8 inch chamber, making it suitable for research and development tasks involving thermal treatment and evaporation processes.
This furnace utilizes high-grade alumina fiber bricks with reflective coating to optimize energy efficiency and maintain thermal insulation. Heating is provided by super 1800 grade molybdenum disilicide (MoSi2) elements, enabling continuous operation at temperatures up to 1650°C and short-term peaks reaching 1700°C. The system integrates a water chiller atop the unit to separate and collect evaporated particles, enhancing experimental control and safety.
주요 기능
- Chamber constructed from 1700°C grade alumina fiber bricks with energy-saving reflective coating
- Heating elements: Super 1800 grade MoSi2 rods (30 x 360 mm) for reliable high-temperature performance
- Temperature control via FA-YD518P-AG PID controller with auto-tune and 30 programmable segments
- Integrated evaporating particle collection system with water chiller for colloid separation
- Double-layer steel casing with air cooling fan to maintain external surface temperature below 60°C
- Thermocouple: Type B (Pt-Rh to Pt-Rh) housed in alumina tube for precise temperature measurement
- Safety features include over-temperature and thermocouple failure alarms
기술 사양
| 매개변수 | 사양 |
|---|---|
| Chamber Size | 8″ x 8″ x 8″ (203 mm x 203 mm x 203 mm) |
| Heating Elements | Super 1800 grade MoSi2, 30 x 360 mm |
| Maximum Continuous Temperature | 1650°C (2912°F) |
| Maximum Short-Term Temperature | 1700°C (3092°F) for less than 0.5 hours |
| Heating Rate | 10°C/min below 1400°C; 5°C/min between 1400°C and 1600°C; 2°C/min above 1600°C |
| Temperature Accuracy | ±1°C |
| Temperature Controller | FA-YD518P-AG PID controller with auto-tune, 30 programmable segments, alarms, and DB9 PC communication port |
| Thermocouple | Type B (Pt-Rh to Pt-Rh) with alumina protection tube |
| 전력 | 5.2 kW |
| 전압 | AC 208-240 V, single phase, 50/60 Hz (32A breaker required) |
| Furnace Structure | Double-layer steel with air cooling fan; alumina crucible with lid; alumina tubes for gas inlet/outlet |
| Particle Collection | Water chiller system for evaporated particle separation and collection |
대표적인 적용 분야
Ideal for high-temperature material synthesis, sintering, evaporation studies, and thermal processing where particle emission control is required. Suitable for research labs focusing on ceramics, metals, and advanced materials development.
구성 및 작동 안내
Optional upgrades include advanced temperature controllers such as the Eurotherm 3504 compatible with LabVIEW and a laptop/software package for remote monitoring and control. The furnace requires a suitable plug (not included) and a 32A air breaker. Users should avoid heating or cooling rates exceeding 10°C/min to prolong furnace life. The unit is not vacuum sealed and is not recommended for use with toxic or explosive gases without appropriate safety measures. Minor refractory ceramic surface cracks may develop over time and can be repaired with alumina coating. Proper insertion of refractory blocks before closing the door is necessary for safe operation.
