KSL-1700X-B-S Compact Bottom Loading Furnace for Rapid Heating and Cooling up to 1700°C with Motorized Sample Loading
The KSL-1700X-B-S furnace is designed for laboratory applications requiring fast thermal cycling and precise temperature control up to 1700°C. It is particularly suited for rapid heating and cooling of small samples in ambient air, as well as for conducting cycling thermal impact tests. This furnace facilitates quick insertion and removal of samples into a preheated chamber via a built-in bottom loading mechanism driven by a DC motor, enhancing workflow efficiency and sample handling safety.
The furnace operates with a heating chamber sized at 100 mm length, 100 mm width, and 150 mm height, equipped with four U-shaped molybdenum disilicide (MoSi2) heating elements. The chamber includes a 30 mm diameter bottom hole and a fibrous alumina rod to assist in inserting alumina crucibles through the lifting fixture. The inner lining consists of alumina polycrystalline fiber coated with high-temperature alumina to improve reflectivity, heating efficiency, and durability. The outer casing features a two-layer air-cooled design to maintain safe external temperatures during operation.
주요 기능
- Bottom loading mechanism with DC motor for rapid sample insertion and removal
- Heating chamber dimensions: 100×100×150 mm with 4 U-type MoSi2 heating elements
- Maximum temperature: 1700°C for up to 30 minutes; continuous operation at 1600°C
- Two-layer air-cooled casing with alumina polycrystalline fiber insulation coated for enhanced efficiency
- Heating rates: 10°C/min up to 1400°C, 5°C/min from 1400 to 1600°C, 2°C/min above 1600°C
- Type B thermocouple for accurate temperature measurement
- Included FA-YD518P-AG PID temperature controller with auto-tune, 30 programmable segments, and safety alarms
기술 사양
| 매개변수 | 사양 |
|---|---|
| 모델 | KSL-1700X-B-S |
| Max Temperature | 1700°C (up to 30 minutes), 1600°C continuous |
| Heating Chamber Size | 100 × 100 × 150 mm |
| Heating Elements | 4 pieces U-type MoSi2 |
| Heating Rate | 10°C/min (RT–1400°C), 5°C/min (1400–1600°C), 2°C/min (>1600°C) |
| Thermocouple | Type B |
| Temperature Controller | FA-YD518P-AG PID with auto-tune, 30 programmable segments, over-temperature and thermocouple failure alarms |
| Power Supply | 208–240 VAC, 50/60 Hz, single phase, 2.5 kW |
| Casing | Two-layer air-cooled with alumina polycrystalline fiber insulation coated with high-temperature alumina |
| 무게 | 838 lb (380 kg) |
대표적인 적용 분야
This furnace is ideal for rapid thermal processing tasks such as sintering, annealing, and thermal cycling tests of small samples in research and development laboratories. Its bottom loading design and fast heating/cooling capabilities make it suitable for materials science, ceramics, metallurgy, and electronic component testing where precise temperature control and quick sample handling are critical.
구성 및 작동 안내
The furnace includes a FA-YD518P-AG temperature controller with PID control and auto-tune functions, allowing programming of up to 30 segments with ramping, cooling, and dwell steps. A power cable is supplied without a plug, requiring user installation according to local electrical standards. Optional NRTL or CSA certification can be provided at additional cost. Users should handle the furnace with care due to its high operating temperatures and ensure proper ventilation and safety protocols during operation.
