KSL-1500X-MGI-4 Four-Chamber Box Furnace with Independent Temperature Control, 1500ºC Max, 120x120x120mm Chambers
The KSL-1500X-MGI-4 is designed for laboratories requiring simultaneous heat treatment of multiple samples under different temperature conditions. Its four separate chambers, each measuring 120 mm cubed, enable high-throughput processing with precise temperature management up to 1500ºC. This capability is especially valuable for research involving phase diagram exploration and material synthesis where varied thermal profiles are needed concurrently.
Each chamber is equipped with an independent temperature control system, allowing users to set and maintain distinct temperatures across the four modules. The furnace employs silicon carbide heating elements housed within high-purity alumina fiber insulation coated with alumina to improve heating efficiency and durability. A double-shell construction with an integrated air cooling system ensures effective surface cooling during operation.
주요 기능
- Four independent box furnace chambers (120x120x120 mm each) for simultaneous multi-sample processing
- Maximum temperature of 1500ºC with continuous operation up to 1400ºC
- Independent PID temperature control with touchscreen interface and 50-stage programmable control
- Silicon carbide heating elements for rapid and uniform heating
- High-purity alumina fiber insulation coated with alumina layer for enhanced efficiency and longevity
- Double-shell structure with built-in air cooling system for surface temperature management
- Includes S-type thermocouples (4 total) for accurate temperature measurement
기술 사양
| 매개변수 | 사양 |
|---|---|
| Chamber Size | 120 x 120 x 120 mm (each chamber) |
| 최고 기온 | 1500ºC (up to 30 minutes), continuous 1400ºC |
| Heating Element | Silicon carbide |
| 온도 제어 | Touchscreen PID controller, 4 independent channels, ±1ºC accuracy (optional ±0.1ºC) |
| Thermocouples | S-type, 4 units |
| 전력 | 10 kW |
| 전압 | AC 220V, 50/60 Hz, single phase |
| Heating Rate | Up to 10ºC per minute |
| Construction | Double-shell with air cooling system |
| 무게 | Approximately 250 lb (113.4 kg) |
대표적인 적용 분야
This furnace is ideal for materials research labs conducting phase diagram studies, sintering, annealing, and heat treatment of ceramics, metals, and advanced materials where multiple temperature profiles are required simultaneously. It supports high-throughput experimentation by processing four samples independently under different thermal conditions.
구성 및 작동 안내
- Includes a touchscreen temperature controller with PC communication via DB9 port and control software
- Optional European temperature control accuracy upgrade available
- Recommended to operate on a dedicated power source within ±8% voltage variation
- Do not use flammable, explosive, or toxic gases with this furnace
- Avoid operation near liquids, magnetic or conductive powders
- Insulation and heating elements are consumables; minor cracks in insulation during use are normal and repairable with patching agents
- Do not open furnace door when temperature exceeds 500ºC to avoid damage and safety risks
