DZF6090II 듀얼 챔버 진공 오븐 (최대 온도 200°C, 총 용량 180L, 기계식 진공 펌프 포함)
The DZF6090II vacuum oven is engineered to support precise thermal processing tasks such as drying and baking sensitive materials under vacuum conditions, particularly suited for battery electrode fabrication workflows. Its design addresses the need for controlled atmosphere and temperature uniformity by providing two separate heating chambers, enabling simultaneous but independent processing of different samples or batches.
This model features two stainless steel chambers, each measuring 450 mm by 450 mm by 450 mm (18″x18″x18″), offering a combined internal volume of 180 liters. Each chamber is equipped with its own programmable temperature controller, allowing independent temperature regulation up to 200°C with ±1°C stability. The oven integrates a mechanical vacuum pump rated at 400 W and 5.5 CFM (156 L/min) capacity, including an exhaust filter to maintain clean vacuum conditions. The vacuum level achievable is approximately 133 Pa (1 Torr), suitable for many laboratory drying and heat treatment applications.
주요 기능
- Two independent heating chambers, each 90 liters in volume, for flexible sample processing
- Maximum operating temperature of 200°C with ±1°C temperature stability
- Included 400W mechanical vacuum pump with exhaust filter for reliable vacuum generation
- Stainless steel 1Cr18Ni9Ti chamber construction with welded bracing for durability
- Silicone door gasket and positive latch door ensure excellent vacuum sealing
- Programmable temperature controllers with built-in over-temperature protection for safe operation
- CE certified for safety compliance
기술 사양
| 매개변수 | 사양 |
|---|---|
| 전압 | Single Phase AC 208 – 240 V, 50/60 Hz |
| Power Consumption | 2200 W |
| 최고 기온 | 200°C (customizable to 250°C at extra cost) |
| 온도 안정성 | ±1°C |
| Chamber Size (each) | 450 mm x 450 mm x 450 mm (18″ x 18″ x 18″) |
| Total Chamber Volume | 180 Liters (6.8 cubic feet) |
| Chamber Material | Stainless Steel 1Cr18Ni9Ti with welded bracing |
| Vacuum Level | 133 Pa (1 Torr) |
| 진공 펌프 | Mechanical pump, 400 W, 5.5 CFM (156 L/min), includes exhaust filter |
| Temperature Controller | Programmable, with built-in over-temperature protection |
| Door Seal | Silicone gasket with positive latch |
| 순중량 | Approx. 209.5 lb (95 kg) |
대표적인 적용 분야
- Drying and baking of battery cathode and anode materials during fabrication
- General vacuum drying of heat-sensitive laboratory samples
- Material conditioning requiring controlled atmosphere and temperature
구성 및 작동 안내
- The oven includes one mechanical vacuum pump and one exhaust filter as standard.
- Temperature calibration kits are available optionally to ensure measurement accuracy.
- After extended high-temperature use, chamber discoloration is normal and does not affect performance.
- Samples should not contact chamber walls to avoid contamination or damage.
