DZF-6050-II 듀얼 진공 오븐 (53L 챔버 2개, 최고 온도 200ºC, 진공 펌프 1개 포함)
DZF-6050-II is designed to support battery electrode fabrication by providing controlled vacuum baking and storage conditions for cathode and anode materials. It features two separate heating chambers, each with a volume of 53 liters, allowing simultaneous processing of different samples under independent temperature control. This dual-chamber setup enhances workflow efficiency by enabling parallel operations within a single integrated system.
The oven operates up to 200ºC with a temperature accuracy of ±1ºC, suitable for precise thermal treatments. Both chambers can be evacuated using a single mechanical vacuum pump included in the package, which delivers a vacuum level down to 133 Pa (10-2 Torr). The chambers are constructed from stainless steel (1Cr18Ni9Ti) with reinforced bracing for durability and feature silicone door gaskets with positive latches to ensure airtight sealing during operation.
주요 기능
- Two independent stainless steel chambers, each 16 x 14 x 15 inches (53L capacity)
- Maximum operating temperature of 200ºC with ±1ºC control accuracy
- Single mechanical vacuum pump included, capable of evacuating both chambers simultaneously
- Mobile two-layer cart included for convenient placement and mobility of the dual oven system
- Built-in over-temperature protection for safe operation
- Mechanical vacuum gauge and exhaust filter included
- CE certified and NRTL certified for 110V models
기술 사양
| 매개변수 | 사양 |
|---|---|
| Chamber Dimensions (W x H x D) | 415 x 345 x 373 mm (16 x 14 x 15 inches) |
| Chamber Volume | 53 liters per chamber, total 106 liters |
| 재료 | Stainless steel 1Cr18Ni9Ti with bracing pieces |
| 최고 기온 | 200ºC |
| 온도 범위 | Room temperature +10ºC to 200ºC |
| Temperature Accuracy | ±1ºC |
| Vacuum Level | 133 Pa (10-2 Torr) |
| 진공 펌프 | Mechanical pump, 240 L/min, 750 W power |
| Power Supply | Single phase AC 110-120V (two outlets required), 50/60 Hz, 2800 W |
| 무게 | Approximately 209.5 lb (95 kg) |
| Certifications | CE certified; NRTL certified for 110V models |
대표적인 적용 분야
This dual vacuum oven is ideal for battery research and development, especially for baking and storing cathode and anode materials under controlled vacuum and temperature conditions. It supports processes requiring precise thermal treatment and moisture removal in battery electrode fabrication workflows.
구성 및 작동 안내
- The oven includes one mechanical vacuum pump with an exhaust filter and stainless steel bellows with KF 25 ports to connect both chambers to the pump.
- A two-layer mobile cart is provided to hold both ovens together for ease of movement and space efficiency.
- Calibration kits are available separately to ensure accurate temperature measurement.
- After extended high-temperature use, chamber discoloration may occur but does not affect performance.
- Samples should not contact the chamber walls to avoid contamination or damage.
