MSK-HRP-3-E Hot Rolling Press with Dual Independent Temperature Control up to 230°C, 10 Ton Pressure, 8″ Diameter x 10″ Width Rollers
The MSK-HRP-3-E hot rolling press is engineered for laboratory-scale calendaring and lamination processes, particularly suited for battery electrode preparation. It enables precise control over material thickness and temperature, essential for achieving uniform electrode coatings and enhancing material properties during hot rolling.
This model incorporates two independently programmable temperature controllers, allowing each roller to be heated up to 230°C with high accuracy. The adjustable roller gap ranges from 0 to 6 mm, with micrometer precision, accommodating various sample thicknesses. Pressure is applied manually via a hydraulic pump, capable of exerting up to 10 metric tons, ensuring effective material deformation and lamination.
주요 기능
- Dual temperature controllers for independent heating of two rollers up to 230°C.
- Manual hydraulic pump applies adjustable pressure up to 10 metric tons.
- Roller gap adjustable from 0 to 6 mm with 0.01 mm accuracy via digital micrometers.
- Rollers made of Cr-plated high-quality tool steel with hardness HRC 60-62.
- Selectable rolling direction (back and forth) for easy material handling.
- Linear roller speed adjustable between 5 and 58 mm/sec with speed display.
- CE certified with optional UL, TUV, or CSA certification available.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Roller Diameter | 200 mm (8″) |
| Roller Width | 250 mm (10″) |
| Roller Surface Hardness | HRC 60-62, Cr plated |
| Maximum Roller Temperature | 230°C (less than 1 hour), continuous use below 200°C |
| Temperature Controller Accuracy | ±2°C |
| Roller Gap Adjustment | 0 to 6 mm, 0.01 mm accuracy via digital micrometers |
| Pressure Application | Manual hydraulic pump, up to 10 metric tons |
| Linear Speed Range | 5 to 58 mm/sec (displayed speed 0-40 mm/sec, actual speed = displayed × 1.5) |
| Power Supply | AC 208-240 V, single phase, 50/60 Hz, 4200 W total |
| Certifications | CE certified; UL, TUV, CSA optional |
대표적인 적용 분야
The MSK-HRP-3-E is ideal for hot rolling and calendaring of battery electrodes, enabling precise thickness control and uniform temperature distribution. It is also suitable for lamination processes requiring controlled pressure and heat, such as polymer film processing and composite material fabrication.
구성 및 작동 안내
The press includes two temperature controllers and a manual hydraulic pump. An optional electric hydraulic pump is available to maintain constant pressure automatically. Users should avoid rolling materials with hardness exceeding 50 HRC to prevent roller damage. Multi-step thickness reduction is recommended for calendaring, with increments of approximately 0.02 mm per pass. Roller surfaces must be cleaned after each use, and acetone can be applied for cleaning and lubrication to prevent corrosion.
