증발 용량 5L/hr, SS316 챔버, 최대 250ºC까지의 PID 온도 제어 기능을 갖춘 MSK-USP-5L 분무 건조기
MSK-USP-5L is designed for laboratory and pilot-scale spray drying tasks where precise evaporation of liquid feed into fine dry particles is required. It is particularly effective for processing heat-sensitive materials such as pharmaceuticals, nanomaterials, catalysts, fuel cell components, and battery materials. This model supports a maximum evaporation rate of 5 liters per hour, enabling efficient production of dry powders with controlled particle size distribution.
The drying process involves atomizing the liquid feed into fine droplets using a dual-channel compressed gas-assisted spray nozzle, which disperses the liquid into droplets ranging from 1 to 120 micrometers in diameter. These droplets are rapidly dried in a stainless steel 316 drying chamber with an 800 mm diameter, where heated air evaporates the solvent. The dried particles are then separated and collected with up to 95% efficiency by a cyclone collector with a 10-liter capacity. Temperature control is managed by a built-in PID controller, maintaining inlet air temperatures up to 300ºC and outlet air temperatures up to 140ºC, with a maximum working temperature of 250ºC to protect sensitive materials.
주요 기능
- Dual-channel anti-clogging spray nozzle for simultaneous spraying of two solutions and prevention of nozzle blockage
- High material collection efficiency of 95% via cyclone separator
- User-friendly digital control panel for adjusting temperature, airflow, pressure, pump speed, and anti-clogging intervals
- Built-in PID temperature controller ensuring ±2ºC accuracy for inlet and outlet air temperatures
- Adjustable peristaltic pump feeding rate from 30 to 2200 ml/h for precise solvent delivery
- Co-current downward spray drying in an 800 mm diameter SS316 chamber
- Optional temperature-controlled nozzle available for operation up to 450ºC (extra cost)
기술 사양
| 매개변수 | 사양 |
|---|---|
| Evaporation Capacity | Max 5 L/hr |
| Drying Chamber Material | Stainless Steel 316 |
| Spray Nozzle Diameter | 0.7 mm |
| Atomized Particle Size Range | 1 – 120 µm |
| Drying Chamber Diameter | 800 mm |
| 온도 제어 | Inlet Air: 30 – 300ºC, Outlet Air: 30 – 140ºC, Max Working Temp: 250ºC, PID Controller ±2ºC |
| Drying Time | 1 – 1.5 seconds |
| Drying Air Supply | Oil-less air compressor included, 120 L/min, Pressure 0.5 – 1 MPa |
| Peristaltic Pump Feeding Rate | 30 – 2200 ml/h adjustable |
| Power Supply | 380 VAC, 50/60 Hz, Three Phase |
| Power Consumption | 18 kW |
| Material Collection Capacity | 10 L |
| 무게 | 1110 lb |
대표적인 적용 분야
This spray dryer is suitable for producing dry powders from heat-sensitive liquids in pharmaceutical manufacturing, nanotechnology research, catalyst preparation, fuel cell component fabrication, and battery material processing. It enables rapid drying with minimal thermal degradation, making it ideal for sensitive compounds.
구성 및 작동 안내
The system includes a dual-channel spray nozzle with an anti-clogging function and a peristaltic pump for solvent feeding. The digital control panel facilitates precise adjustments of drying parameters. An optional temperature-controlled nozzle capable of reaching 450ºC is available for specialized applications at additional cost. Users should ensure proper ventilation and follow safety protocols when operating at high temperatures and handling volatile solvents.
