YLJ-CIP-200 200T Electric Cold Isostatic Press with 60/80 mm ID Vessel for High-Density Ceramic Sample Preparation
The YLJ-CIP-200 is engineered to facilitate the cold isostatic pressing of ceramic materials, enabling the production of high-density rods, disks, and targets with uniform compaction. This system is particularly suited for laboratory and research environments where precise control over pressing pressure and sample integrity is critical. It offers an alternative to traditional dry die pressing by applying hydrostatic pressure evenly around the sample.
The press operates with a maximum force of 200 metric tons, driven by an electric hydraulic pump powered by a 1000W AC motor. It supports CIP vessels with inner diameters of 60 mm and 80 mm, allowing maximum pressures of 500 MPa and 350 MPa respectively. The system includes a digital pressure display and control panel with a built-in printer for recording pressing data, enhancing process monitoring and documentation.
Wichtigste Merkmale
- Hydraulic press capacity adjustable from 10 to 200 metric tons with ±1% pressure accuracy.
- Digital pressure display in kilonewtons and real-time pressure feedback based on die size.
- Electric hydraulic pump powered by a 1000W AC motor, standard 220V±10% single phase supply.
- Digital control panel with integrated paper printer for strength data output.
- Bottom hydraulic cylinder travel distance up to 100 mm with safety range sensing switch.
- Top support screw adjustable height of 310 mm for flexible sample positioning.
- Included moving cart for safe and convenient CIP die handling.
- Metal press cover with magnetic door latch for operator safety during pressing.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Maximum Pressing Force | 200 Metric Tons |
| Pressure Adjustment Range | 10 – 200 Metric Tons (manual ON/OFF valve) |
| Pressure Accuracy | ±1% |
| Electric Hydraulic Pump Power | 1000W AC Motor |
| Stromversorgung | 220V±10%, Single Phase, 50/60 Hz (Optional 110V Transformer) |
| Digital Control Panel | Includes built-in paper printer for strength data |
| Bottom Hydraulic Cylinder Travel | 0 – 100 mm with range sensing switch |
| Top Support Screw Adjustable Height | 310 mm |
| Working Space (Top & Bottom Plates) | 240 mm L × 240 mm W × 300 mm H |
| CIP Vessel Inner Diameter Options | 60 mm (max pressure 500 MPa), 80 mm (max pressure 350 MPa) |
| Maximum Force Applied to Sample | 141 T (60 mm vessel), 175 T (80 mm vessel) |
| Safety Features | Metal door with magnetic latch; door must be closed before operation |
Typische Anwendungsbereiche
This cold isostatic press is ideal for fabricating high-density ceramic components used in electronics, optics, and advanced materials research. It is suitable for preparing ceramic rods, disks, and targets with uniform density and minimal defects. The equipment supports sample sealing techniques such as liquid rubber encapsulation and vacuum sealing to prevent contamination during pressing.
Hinweise zur Konfiguration und zum Betrieb
The system includes a moving cart for safe handling of CIP dies. Optional dies with 60 mm and 80 mm inner diameters are available separately. For sample preparation, liquid rubber sealing and vacuum sealing accessories can be used to maintain sample integrity and avoid air contamination. Operators must ensure the metal door is securely closed before initiating pressing to comply with safety protocols.
