PTLUMB Micrometer-Precision Programmable Dip Coater with Integrated Drying Oven up to 100°C and Touchscreen Control
The PTLUMB is engineered to support research and development laboratories in fabricating uniform optical and epitaxial films via dip coating. It enables precise control over coating parameters such as dipping speed, pulling speed, dwell time, and cycle count, all programmable through a user-friendly 6-inch color LCD touchscreen interface. This level of control facilitates reproducible thin film deposition from liquid solutions.
Wichtigste Merkmale
- Programmable dipping and pulling speeds from 1 to 500 µm/sec with ±0.05% accuracy
- Adjustable dipping/pulling distance up to 60 mm and dwell time programmable up to 999 seconds
- Cycle programming supports up to 20 coating cycles automatically
- 6-inch color touchscreen controller for intuitive parameter setup and operation
- Integrated drying oven with temperature control from 50°C to 100°C, ±1°C accuracy
- Sample holder with two screw clips for secure mounting and guided vertical movement
- Includes a 150 mL beaker and holder for coating solution placement
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Betriebsspannung | 110/220 V AC selectable |
| Max Power Consumption (Coater) | 700 W |
| Systemsteuerung | 6″ LCD color touchscreen |
| Dipping/Pulling Speed | 1-500 µm/sec, ±0.05% accuracy |
| Dipping/Pulling Distance | 0-60 mm adjustable |
| Dwell Time | Up to 999 seconds |
| Cycle Count | Up to 20 cycles |
| Sample Holder | Two screw clips on guided rods |
| Max Sample Size | 3″ (L) x 2″ (W) |
| Max Sample Weight | Less than 250 g |
| Solution Container | One 150 mL beaker included |
| Oven Voltage | 110/220 V AC selectable |
| Oven Max Power | 600 W |
| Oven Temperature Range | 50-100°C, ±1°C accuracy |
| Oven Chamber Dimensions | 280 mm x 280 mm x 280 mm |
| Oven Inner Material | Stainless steel |
Typische Anwendungsbereiche
The PTLUMB is ideal for preparing uniform thin films in research areas such as optical coatings, epitaxial film growth, and surface functionalization. It supports experiments requiring precise control of film thickness and drying conditions.
Hinweise zur Konfiguration und zum Betrieb
The system includes a sample holder with two screw clips and a beaker holder for the coating solution. For enhanced film quality, substrate pre-treatment with a plasma cleaner and solution homogenization using an ultrasonic processor are recommended but not included. The unit is CE certified, with additional NRTL or CSA certification available upon request at extra cost.
Maße & Versand
| Product dimensions | 406mm(L) x 406mm(W) x 610mm(H) |
|---|
