MSK-2150-H5 Pressure-Control Cold Rolling Press with 5T Max Load, 150mm Width, Glovebox Compatible and Optional Roll-to-Roll System
The MSK-2150-H5 is engineered for laboratory-scale battery electrode calendaring, offering precise control over rolling pressure and speed to optimize electrode density and uniformity. Its design supports processing within glove boxes under inert atmospheres, making it suitable for sensitive materials such as lithium-based electrodes. The press accommodates sample widths up to 140 mm with rollers 147 mm wide and 100 mm in diameter, constructed from hardened steel with chromium electroplating for durability and corrosion resistance.
This electric rolling press features a maximum adjustable loading force of 5 tons, controlled via a touchscreen interface that displays rolling speed, pressure, and actual pressure in real time. The rolling speed is adjustable between 0.1 and 2.5 meters per minute, allowing fine tuning for different material properties. The roller gap can be precisely set from 0 to 2.0 mm using dual micrometers, ensuring accurate thickness control during calendaring.
Wichtigste Merkmale
- Adjustable loading force up to 5 tons with touchscreen control for precise pressure management.
- Rolling speed adjustable from 0.1 to 2.5 m/min with forward and reverse rolling direction options.
- Rollers made of hardened steel (HRC 58-60) with chromium electroplated coating for wear resistance.
- Dual micrometer system for accurate roller gap adjustment within 0 to 2.0 mm range.
- Touchscreen interface displays rolling speed, set pressure, and actual pressure with alarm alerts.
- Compatible with glove box environments for inert atmosphere processing.
- Optional roll-to-roll system available for continuous electrode calendaring.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Maximum Loading Force | 5 Tons (adjustable) |
| Rolling Speed Range | 0.1 – 2.5 m/min |
| Abmessungen der Walze | 147 mm width x 100 mm diameter |
| Roller Material & Hardness | Hardened steel with Cr electroplated coating, HRC 58-60 |
| Roller Gap Adjustment | 0 – 2.0 mm via dual micrometer |
| Rolling Accuracy | ±1.5 μm |
| Motorleistung | 750 W AC motor with frequency speed controller |
| Stromversorgung | AC 110-220 V, single phase, 50/60 Hz, 1000 W |
| Digital Micrometer Range | 0 – 10 mm, resolution 0.01 mm, unit selectable (mm/in) |
| Operating Temperature | 0 ~ 40°C |
| Einhaltung der Vorschriften | CE Certified; NRTL or CSA certification optional |
Typische Anwendungsbereiche
This rolling press is primarily used for calendaring battery electrodes in research and development settings, improving electrode density and uniformity. It is suitable for processing lithium-ion battery electrodes and other materials requiring precise thickness control under inert atmospheres. The optional roll-to-roll system supports continuous electrode fabrication workflows.
Hinweise zur Konfiguration und zum Betrieb
The MSK-2150-H5 can be upgraded to a 200 mm width model (MSK-2200-H5) if wider rollers are required. Rollers can be coated with PTFE for specialized applications such as lithium-metal electrode rolling. Users must avoid rolling materials harder than 50 HRC to prevent damage. Multi-step calendaring with thickness decrements not exceeding 0.02 mm per pass is recommended. Roller surfaces should be cleaned with acetone after each use and lubricated with anti-rust agents during idle periods to prevent corrosion.
The optional roll-to-roll unit (MSK-2150-RD or MSK-2200-RD) requires a separate 208-240 VAC power supply and is not supplied with the power plug. Alarm alerts and operational status are displayed on the touchscreen for safe and efficient use.
