MP300 Hot Mounting Press for Metallographic Sample Encapsulation
The MP300 hot mounting press is engineered to facilitate the encapsulation of metallographic samples into cylindrical molds, enabling efficient sample preparation for microscopic examination and material analysis. This process is essential for stabilizing and protecting delicate or irregularly shaped specimens during grinding and polishing stages.
This model produces standard cylindrical mounts with a diameter of 22 mm and an effective sample height under 40 mm. Optional compression molds are available to accommodate larger diameters of 25, 30, and 45 mm, providing flexibility for various sample sizes. The press operates with precise temperature and pressure controls to ensure consistent mounting quality.
Wichtigste Merkmale
- Temperature range adjustable from 50 to 180°C for optimal mounting resin curing.
- Pressure control up to 100 kg with a built-in load cell for accurate force application.
- Time control adjustable from 1 to 900 seconds to accommodate different mounting materials and sample requirements.
- Standard compression mold diameter of 22 mm; optional molds available for 25, 30, and 45 mm diameters.
- Powered by AC 208-240V 50/60Hz at 650W; requires a 1500W voltage transformer for 110V operation.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Stromversorgung | AC 208-240V, 50/60Hz, 650W |
| Voltage Transformer Requirement | 1500W transformer needed for 110V use |
| Temperaturbereich | 50 – 180°C |
| Time Control Range | 1 – 900 seconds |
| Pressure Control | Up to 100 kg with built-in load cell |
| Standard Compression Mold Diameter | Ø22 mm |
| Optional Compression Mold Diameters | Ø25, 30, and 45 mm |
| Effective Sample Height | Less than 40 mm |
Typische Anwendungsbereiche
The MP300 is ideal for laboratories performing metallographic sample preparation, including materials science, metallurgy, electronics, and quality control environments. It is used to encapsulate metal, ceramic, composite, and other solid samples to facilitate subsequent grinding, polishing, and microscopic analysis.
Hinweise zur Konfiguration und zum Betrieb
The press includes the standard Ø22 mm compression mold. Optional molds for larger diameters must be acquired separately. For use with 110V power supplies, a suitable 1500W voltage transformer is required. Compression mounting powder for phenolic B mode is available as an optional consumable. Operators should ensure proper handling of heated components and follow safety protocols during operation.
Maße & Versand
| Product dimensions | 340 x 270 x 400 mm |
|---|
