MSK-5070-AC Heavy-Duty Rolling Press with 180 mm Width, Variable Speed, and 7.5 HP for Metallic Materials up to 20 mm Thickness
The MSK-5070-AC is engineered for laboratory and industrial applications requiring heavy-duty rolling of metallic materials. It is optimized for metals with hardness less than Rc 50, including copper, stainless steel, and nickel alloys. This rolling press accommodates material thicknesses from 0.02 mm up to 20 mm, providing versatility for various sample sizes and thickness reduction tasks.
Equipped with 180 mm wide and 132 mm diameter rollers made from hardened Cr12MoV steel with a hardness rating of HRC 60-62, the MSK-5070-AC ensures durability and consistent rolling quality. The gap between rollers is adjustable with a precision of ±0.05 mm, allowing fine control over the rolling thickness. The rolling speed is variable from 0 to 18 rpm, enabling line speeds up to 7 meters per minute, suitable for both batch and continuous rolling processes.
Wichtigste Merkmale
- Heavy-duty rollers 180 mm wide and 132 mm diameter, made of hardened Cr12MoV steel (HRC 60-62).
- Variable rolling speed adjustable from 0 to 18 rpm, with line speeds up to 7 m/min.
- Adjustable roller gap for rolling thickness from 0.02 mm to 20 mm with ±0.05 mm accuracy.
- 7.5 horsepower motor powered by 208-240 VAC three-phase, 50/60 Hz, 20 A supply.
- Recommended sample width less than 60 mm for optimal rolling performance.
- Optional 30 mm roller gap available upon request for thicker materials.
- Suitable for metals with hardness below Rc 50; annealing recommended for work-hardening materials.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Roller Width | 180 mm (7.1″) |
| Rollendurchmesser | 132 mm (~5″) |
| Material der Walze | Hardened Cr12MoV Steel |
| Roller Hardness | HRC 60-62 |
| Rolling Thickness Range | 0.02 mm to 20 mm (adjustable) |
| Roller Gap Accuracy | ±0.05 mm |
| Rolling Speed | 0 to 18 rpm (variable), up to 7 m/min line speed |
| Motorleistung | 7.5 HP |
| Stromversorgung | 208-240 VAC, Three Phase, 50/60 Hz, 20 A |
| Recommended Sample Width | Less than 60 mm |
Typische Anwendungsbereiche
This rolling press is ideal for laboratory-scale rolling of metallic sheets and strips, especially for research and development of copper, stainless steel, nickel alloys, and other metals with hardness below Rc 50. It supports thickness reduction, material conditioning, and preparation of samples for further processing or testing.
Hinweise zur Konfiguration und zum Betrieb
The machine includes the rolling press with hardened rollers and a variable speed drive system. Optional features include a 30 mm roller gap for thicker materials. Users should avoid rolling materials harder than Rc 50 to prevent damage. For metals prone to work hardening, annealing between rolling passes is recommended to maintain ductility. Continuous rolling setups can be arranged based on specific process requirements. NRTL certification is available as an option at additional cost.
