MSK-BSL-H200 Roll-to-Roll Hot Laminator for Tri-Layer Composite with 200 mm Width, Max 120°C and 0.6 Ton Pressing Force
The MSK-BSL-H200 is engineered for the lamination of tri-layer composite materials using a roll-to-roll process. It is particularly suited for applications requiring controlled heat and pressure to bond multiple layers while maintaining material integrity. Protective layers are applied during lamination to shield the composite surfaces from damage during the rolling press and can be removed after the process is complete.
This laminator features a pair of rollers—a stainless steel roller and a rubber roller, each 120 mm in diameter—designed to handle substrates up to 180 mm wide. The system allows lamination at speeds up to 5 meters per minute, with adjustable temperature control up to 120°C and a maximum pressing force of 0.6 tons. The lamination gap can be precisely set up to 2 mm with a gauge resolution of 1 micrometer, ensuring consistent pressure application across the substrate.
Wichtigste Merkmale
- Roll-to-roll lamination optimized for tri-layer composite materials.
- Protective layers applied during lamination to prevent surface damage.
- Adjustable lamination temperature up to 120°C for process flexibility.
- Maximum lamination pressure of 0.6 tons with precise gap control (up to 2 mm, 1 µm resolution).
- Roller width of 200 mm with substrate width support under 180 mm.
- Lamination speed up to 5 m/min for efficient processing.
- Requires compressed air supply (0.5 – 0.8 MPa) for pneumatic operation.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Stromversorgung | 208–240 V Wechselstrom, 50/60 Hz, einphasig |
| Stromverbrauch | 3.85 kW |
| Compressed Air | 0.5 – 0.8 MPa (for pneumatic operation) |
| Rollers | One stainless steel roller (Ø120 mm), one rubber roller (Ø120 mm) |
| Roller Width | 200 mm |
| Maximum Laminating Width | Substrate width less than 180 mm |
| Laminating Speed | Up to 5 m/min |
| Maximum Lamination Pressure | 0.6 tons |
| Lamination Gap | Up to 2 mm (gauge resolution 1 µm) |
| Maximum Lamination Temperature | 120°C (adjustable) |
| Winding Roller Diameter | Up to Ø200 mm, cardboard core diameter 3″ |
| Zertifizierungen | NRTL or CSA certification available upon request (extra cost) |
Typische Anwendungsbereiche
This laminator is ideal for research and production environments where tri-layer composite films require uniform heat and pressure lamination. It is commonly used in electronics, flexible displays, battery manufacturing, and advanced material development where precise lamination quality is critical.
