MSK-PSP-HPL2020 Precise Heating Plate 200×200 mm with Uniform Heating up to 200°C for Perovskite Solar Cell Drying
The MSK-PSP-HPL2020 is designed specifically to meet the precise thermal processing needs of perovskite solar cell fabrication, particularly for solvent and ligand removal during drying. Its 200 mm by 200 mm heating surface provides ample area for substrate treatment, ensuring consistent and uniform temperature distribution essential for high-quality film formation.
This heating plate achieves rapid temperature ramp-up rates up to 10°C per minute, reaching a maximum operating temperature of 200°C. The temperature control system maintains accuracy within ±0.5% of full scale and uniformity within ±1%, which is critical for reproducible processing results. The heating element is powered by a 2500 W input at AC220V ±10%, 50/60Hz single-phase supply, making it suitable for standard laboratory electrical infrastructure.
Key Features
- Heating area of 200 mm × 200 mm made from aluminum alloy for efficient thermal conduction
- Maximum working temperature of 200°C with precise temperature control (±0.5%FS)
- Uniform temperature distribution with ±1% full scale uniformity
- Fast heating speed up to 10°C per minute for efficient processing
- Input power of 2500 W at standard AC220V ±10%, 50/60Hz single phase
- Compact footprint with dimensions 300 mm × 320 mm × 180 mm and weight approximately 15 kg
- CE certified with optional NRTL or CSA certification available upon request
Technical Specifications
| Parameter | Specification |
|---|---|
| Heating Area | 200 mm × 200 mm |
| Material | Aluminum alloy |
| Maximum Temperature | 200°C |
| Temperature Control Accuracy | ±0.5% Full Scale |
| Temperature Uniformity | ±1% Full Scale |
| Heating Rate | Up to 10°C/min |
| Input Voltage | AC220V ±10%, 50/60Hz, single phase |
| Power Consumption | 2500 W |
| Dimensions (L×W×H) | 300 mm × 320 mm × 180 mm |
| Weight | ~15 kg |
| Certifications | CE certified; NRTL or CSA optional |
Typical Applications
This heating plate is ideal for drying perovskite solar cells by effectively removing solvents and ligands during fabrication. It can also be used for other substrate treatments requiring precise and uniform heating up to 200°C in research and development laboratories.
Configuration & Operating Notes
The MSK-PSP-HPL2020 is supplied as a standalone heating plate unit. Users should ensure stable electrical supply matching the specified input voltage and frequency. Optional certifications such as NRTL or CSA can be requested for compliance with regional safety standards. Proper handling and thermal safety precautions should be observed during operation to prevent burns or equipment damage.
