MSK-H2300-E150 Electric Hot Rolling Press with 30T Pressure, 150°C Max Temperature, and 300mm Wide Rollers
The MSK-H2300-E150 is engineered for laboratory-scale hot rolling applications requiring precise control over pressure, temperature, and rolling thickness. It is particularly suited for processing materials such as battery electrodes, plastic films, soft metals, and composite foils where densification and surface quality enhancement are critical. The press accommodates materials up to 200 mm in width on rollers that are 300 mm wide and 196 mm in diameter.
This electric hot rolling press integrates a hydraulic pressure regulating system controlled via a PLC touchscreen interface, allowing stable pressure application up to 30 tons. The rollers are heated by infrared tubes to a maximum temperature of 150°C, maintaining temperature uniformity within ±5°C over a 200 mm zone. Rolling thickness can be manually adjusted from 0 to 3 mm with an accuracy of ±3 μm under uniform sample conditions. The system supports rolling speeds ranging from 0.5 to 4.7 meters per minute.
Key Features
- Hydraulic pressure control with real-time display and data logging via touchscreen PLC interface.
- Infrared heated rollers with chromium-coated 9Cr3Mo steel surface, hardness HRC 65-70.
- Manual rolling gap adjustment up to 3 mm with high thickness accuracy.
- Maximum rolling pressure of 30 tons, adjustable during operation.
- Optional roll-to-roll (R2R) system for continuous substrate unwinding and winding.
- Supports rolling speeds from 0.5 to 4.7 m/min for process flexibility.
- Safety features include warnings against rolling materials harder than 60 HRC and roller surface temperature calibration.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | MSK-H2300-E150 |
| Power Supply | AC 220V ±10%, Single Phase, 50/60Hz, 8 kW |
| Roller Diameter | 196 mm |
| Roller Width | 300 mm (max rolling width recommended 200 mm) |
| Roller Material | 9Cr3Mo steel with chromium coating >0.08 mm thickness |
| Roller Hardness | HRC 65-70 (Do not roll materials > 60 HRC) |
| Max Roller Temperature | 150°C ±5°C (IR heating), optional 200°C available |
| Rolling Gap Thickness | 0 to 3 mm, manual adjustment |
| Rolling Thickness Accuracy | ±3 μm (if sample uniformity ≤ ±2 μm) |
| Max Pressure | 30 Tons, adjustable via touchscreen |
| Rolling Speed | 0.5 to 4.7 m/min |
Typical Applications
Ideal for densifying and improving surface finish of battery electrodes, plastic films, soft metals, and composite foils in research and development or small-scale production environments. Suitable for materials requiring controlled hot calendaring with precise pressure and temperature management.
Configuration & Operating Notes
The MSK-H2300-E150 includes a PLC touchscreen control panel for easy adjustment and monitoring of pressure, temperature, and rolling speed. The pneumatic pressure regulating system ensures stable operation. An optional roll-to-roll (R2R) system can be integrated for continuous processing of substrate rolls.
Users must clean rollers with ethanol or acetone after each use and keep them dry to prevent corrosion. Materials harder than 60 HRC should not be rolled to avoid damage. Multi-step rolling with thickness decrements not exceeding 0.02 mm per pass is recommended for thick samples. Roller surface temperature may vary from controller readings and should be calibrated periodically. Regular lubrication of roller bearings is advised to prolong service life.
Dimensions & Shipping
| Product dimensions | L1241mm*W600mm*H981mm |
|---|
