HP-1350X Resistance Heated Pellet Pressing Furnace for Ceramic and Metallic Materials, Up to 1350°C and 100 MPa in Oxygen Atmosphere
The HP-1350X is engineered to address the challenges of pressing and sintering ceramic and metallic pellets under precisely controlled atmospheres, including oxygen. It is particularly suited for research on the effects of oxygen pressure on functional oxide ceramics, enabling controlled pellet fabrication and thermal processing within a robust stainless steel chamber.
This system integrates a resistance heating furnace capable of reaching up to 1350°C working temperature, combined with a servo-driven pressing mechanism that applies pressures up to 100 MPa. The chamber supports vacuum and positive pressure operation up to 3 bar, with a maximum vacuum level of 10⁻⁵ Torr, facilitating versatile atmosphere control for advanced material studies.
Key Features
- Resistance-heated furnace with maximum working temperature of 1350°C (up to 1400°C in some specifications).
- Precision servo motor-driven pressing mechanism with maximum applied load of 2000 kgf and pressure up to 100 MPa.
- Supports pellet diameters ranging from 10 to 12.7 mm using a standard 12 mm inner diameter silicon nitride pressing die.
- Stainless steel vacuum chamber (Ø315 × 315 mm) with quartz observation window and ports for vacuum and pressure control.
- Programmable temperature and pressure control via integrated touchscreen interface and PC monitoring software.
- Vacuum and positive pressure operation capability, with maximum chamber pressure of 3 bar and vacuum level down to 10⁻⁵ Torr.
- Includes KJ5300 digital recirculating water chiller for system cooling.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | HP-1350X |
| Maximum Furnace Working Temperature | 1350°C (product overview), 1400°C (detailed specs) |
| Maximum Heating Element Temperature | 1500°C (Mo2Si coil heater rating) |
| Heating Rate | Up to 20°C/min (overview), up to 100°C/min (detailed specs) |
| Temperature Control Accuracy | ±2°C |
| Pressing Mechanism | Servo motor-driven with PID pressure control |
| Maximum Applied Load | 2000 kgf |
| Maximum Pressing Pressure | 100 MPa (dependent on pressing area) |
| Pressing Die | Silicon nitride (Si3N4), 12 mm inner diameter |
| Pellet Diameter Range | 10–12.7 mm |
| Vacuum Chamber Material | Stainless steel |
| Chamber Internal Dimensions | Ø315 × 315 mm (H) |
| Observation Window | Quartz, 120 mm diameter |
| Vacuum Ports | KF25 and KF40 ports at rear |
| Maximum Vacuum Level | 10⁻⁵ Torr |
| Maximum Positive Chamber Pressure | 3 bar |
| Power Supply | 208–240 V AC, single phase, 50/60 Hz |
| Rated Power | 5 kW |
| Temperature Controller | SCR controller with Type B thermocouple, 30 programmable segments |
| Control Interface | Integrated touchscreen with PC monitoring software, RS-485 communication |
| Included Cooling | KJ5300 digital recirculating water chiller, 16 L/min flow, 6000 BTU/hr capacity |
Typical Applications
The HP-1350X is ideal for laboratory research involving the pressing and sintering of ceramic and metallic pellets under controlled oxygen atmospheres. It supports studies on oxygen pressure effects in functional oxide ceramics, development of advanced ceramic materials, and precise pellet fabrication for materials science and engineering applications.
Configuration & Operating Notes
The system includes one silicon nitride pressing die with a 12 mm inner diameter suitable for pellets sized 10–12.7 mm. Additional dies for other pellet sizes are not included and must be sourced separately if needed. The vacuum pump is optional and not supplied as standard; the chamber is equipped with KF25 and KF40 ports for vacuum connection.
Users should verify the applicable maximum furnace temperature, heating rate, and pressing pressure limits for their specific applications, as some specifications differ between overview and detailed data. The heating element is rated up to 1500°C but furnace operation should not exceed the specified maximum working temperature. Proper cooling via the included water chiller is essential for stable operation.
