DZF-6020-HT400P Vacuum Oven with 25L Stainless Steel Chamber, Quartz Observation Window, 400°C Max Temperature, Flow Meter, Water Chiller & Rotary Vane Vacuum Pump
The DZF-6020-HT400P is designed for laboratory processes requiring precise temperature control under vacuum conditions, such as drying, curing, vacuum embedding, and plating. Its 25-liter stainless steel chamber (12 x 12 x 11 inches) provides ample space for sample processing while maintaining a controlled environment. The oven features a closable 4″ x 4″ quartz window on the front door, allowing clear observation of samples without compromising temperature uniformity.
This vacuum oven operates up to 400°C with a 30-segment programmable temperature controller that ensures PID precise control and built-in over-temperature protection. The radiant wall heating system promotes temperature uniformity within ±10°C at 100°C in a central 6″ x 6″ x 5″ area. The chamber is sealed with a silicone gasket supported by a water-cooled door flange to maintain vacuum integrity and prolong gasket life. Included accessories enhance operational efficiency and safety, such as two stainless steel shelves, a rotary vane vacuum pump with exhaust filter and KF-D25 inlet, a digital temperature-controlled recirculating water chiller, and a flow meter for gas flow monitoring.
Key Features
- 25L vacuumable stainless steel chamber with dimensions 12″ x 12″ x 11″
- Maximum operating temperature of 400°C with 30-segment programmable PID controller
- Closable quartz observation window (4″ x 4″, 20 mm diameter) for sample monitoring
- Water-cooled silicone door gasket and door flange for reliable vacuum sealing
- Includes rotary vane vacuum pump with exhaust filter and KF-D25 inlet port
- Digital temperature-controlled recirculating water chiller with 16 L/min flow rate
- Flow meter with range 200 to 2000 ml/min for gas inlet control
Technical Specifications
| Parameter | Specification |
|---|---|
| Chamber Material | Stainless Steel |
| Chamber Dimensions (L x W x H) | 300 x 300 x 280 mm (12 x 12 x 11 inches) |
| Chamber Volume | 25 Liters |
| Maximum Temperature | 400°C continuous |
| Temperature Controller | 30-segment programmable PID with over-temperature protection |
| Temperature Stability | ±1°C |
| Temperature Uniformity | ±10°C at 100°C (central 6″x6″x5″ area at 25″ Hg vacuum) |
| Heating Rate | Up to 2.5°C/min (RT to 300°C), 1.4°C/min (300°C to 400°C) |
| Cooling Rate | Less than 5°C/min (no rapid cooling) |
| Thermocouple Type | K type |
| Vacuum Level | Less than 5 x 10⁻² torr after pumping; working pressure under 800 torr |
| Vacuum Pump | Rotary vane vacuum pump with exhaust filter and KF-D25 inlet (included) |
| Gas Inlet | 1/4″ stainless steel fitting port with needle valve |
| Flow Meter Range | 200 to 2000 ml/min |
| Water Cooling | Digital temperature-controlled recirculating water chiller, 16 L/min flow rate |
| Power Consumption | 1600 W |
| Voltage | 208-240 VAC (20A circuit breaker included; power cable included without plug) |
| Weight | 149 lb (67.6 kg) |
Typical Applications
This vacuum oven is suitable for laboratory drying of moisture-sensitive materials, curing of coatings, vacuum embedding of samples, plating processes, and other applications requiring controlled heating under vacuum.
Configuration & Operating Notes
- Includes two stainless steel shelves for sample support.
- Water cooling is required for the silicone door gasket and door flange to maintain vacuum seal longevity; recommended water flow is 16 L/min.
- Use anti-corrosion coolant in the water chiller for optimal performance.
- Cooling temperature should be set between 15-20°C to prevent condensation or freezing inside cooling tubes.
- Slow cooling (<5°C/min) is advised to avoid thermal shock to the quartz window.
- RS-485 communication port is built-in for PC control; PC software and communication chip are available separately.
Certification
- CE Certified
- NRTL or CSA certification available upon request at additional cost
