YLJ-CIP-15 Compact Cold Isostatic Press with 22mm ID Vessel, Up to 380 MPa Pressure for Glovebox Use
The YLJ-CIP-15 is engineered for laboratory-scale cold isostatic pressing tasks requiring precise high-pressure application on small samples. Its compact design and small internal vessel diameter of 22mm make it ideal for producing dense compound pellets and small-diameter rods, especially when working with air-sensitive materials inside glove boxes. This press enables uniform pressure application through isostatic compression, enhancing material density and structural integrity.
Constructed with an ultra-strength alloy pressure vessel protected by a stainless steel jacket, the YLJ-CIP-15 can sustain continuous pressures up to 300 MPa and short-term pressures up to 380 MPa. The hydraulic system is manually operated with a 15-ton capacity press, providing controlled force application. The vessel accommodates samples up to 70mm in height, with a maximum piston travel of 20mm. A plastic protective cover is included to enhance operational safety.
주요 기능
- 22mm internal diameter pressure vessel made from ultra-strength alloy with stainless steel protective jacket.
- Maximum continuous pressure of 300 MPa; peak pressure up to 380 MPa for less than 5 minutes.
- Operated by a 15-ton manual hydraulic press with precise pressure control and optional digital pressure gauge with alarm.
- Compact footprint suitable for placement inside glove boxes for handling air-sensitive samples.
- Sample capacity up to 70mm height with a maximum piston travel of 20mm.
- Includes cold isostatic pressing dies, rubber sealing rings, pushing rod handwheel, hydraulic oil, and necessary tools.
- CE certified for compliance with safety standards.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Pressure Vessel Internal Diameter | 22 mm |
| Pressure Vessel Height | 90 mm (max sample height 70 mm) |
| Material of Pressure Vessel | Ultra-strength alloy with stainless steel protective jacket |
| Maximum Continuous Pressure | 300 MPa |
| Maximum Short-Term Pressure (under 5 min) | 380 MPa |
| Hydraulic Press Capacity | 15 Tons (manual) |
| Bottom Cylinder (Piston) Travel Distance | 20 mm max |
| Operating Temperature Range | 10 – 40 °C |
| Compliance | CE Certified |
대표적인 적용 분야
The YLJ-CIP-15 is suited for preparing high-density pellets and small rods from powders or compounds, particularly when uniform isostatic pressure is required. Its compact size allows integration into glove boxes for processing air-sensitive materials in research and development laboratories. It is also applicable as a pellet press for sample pre-pressing prior to further densification.
구성 및 작동 안내
The system includes the main 15-ton manual hydraulic press, a set of cold isostatic pressing dies (locating plate, top and bottom pressing dies), three black rubber sealing rings, a pushing rod handwheel, hydraulic pressing oil, and a socket head screwdriver. Optional accessories include a digital pressure gauge with alarm for enhanced pressure monitoring.
Users should avoid holding target pressure for longer than 8 minutes and ensure complete pressure release before adjusting the handwheel or pressure release valve. The piston travel must not exceed 20 mm. For sealing samples, liquid rubber or vacuum sealing methods are recommended to maintain sample integrity during pressing.
