STX-50QX Diamond Wire Curve Cutting Machine for Irregular Non-Conductive Samples up to 150x100x50 mm with PC Control
The STX-50QX is engineered to address the challenge of cutting irregularly shaped samples composed of non-conductive materials such as ceramics and polymer composites, which are difficult to process using traditional electrical discharge machining (EDM). This machine enables precise curve and straight line cuts by utilizing a diamond wire cutting method controlled through an integrated PC and specialized software.
Users input a 2D engineering drawing into the software, which then automatically controls the cutting process. The system accommodates samples up to 150 mm in length, 100 mm in width, and 50 mm in thickness, making it suitable for a variety of laboratory and research applications requiring complex sample geometries.
주요 기능
- PC-controlled operation with dedicated software for automatic cutting from 2D drawings.
- Maximum sample size of 150 x 100 x 50 mm for versatile sample preparation.
- High precision travel resolution of 0.01 mm on X and Y axes with adjustable travel speeds from 0.06 to 6 mm/min.
- Diamond wire moving speed up to 15 m/s for efficient cutting performance.
- Capable of cutting almost any material with hardness less than diamond, including non-conductive and some metallic materials at lower speeds.
- Sample holding platform sized 140 mm x 275 mm to securely accommodate workpieces.
- CE certified with optional NRTL or CSA certification available upon request.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Power Supply | AC 220V ±10%, 50/60 Hz (AC 110V version via 1000W transformer available) |
| Power Consumption | 500 W |
| X-Axis Travel Range | 0 – 100 mm |
| Y-Axis Travel Range | 0 – 150 mm |
| Maximum Cutting Depth | 50 mm |
| Travel Resolution | 0.01 mm |
| X/Y Axis Travel Speed | 0.06 – 6 mm/min |
| Diamond Wire Speed | Up to 15 m/s |
| Sample Holding Platform Size | 140 mm x 275 mm |
| Maximum Sample Size | 150 mm x 100 mm x 50 mm |
| Control System | Dedicated PC with pre-installed software |
대표적인 적용 분야
Ideal for preparing irregularly shaped samples from ceramics, polymer composites, and other non-conductive materials for analysis and testing. Also applicable for cutting certain metallic materials at reduced speeds where EDM is unsuitable.
구성 및 작동 안내
The machine includes a dedicated PC and software for programming cutting paths from 2D drawings. Diamond wire is a consumable component with typical service life under 30 hours at cutting speeds of 1-2 mm/min; users should maintain an adequate supply of spare wires. Different materials require adjustment of cutting parameters to optimize performance. Optional certifications such as NRTL or CSA can be requested at additional cost. Online training is available to assist with operation and parameter optimization.
