MSKUSP17SP 1.7 MHz Ultrasonic Atomizing Generator with Digital Syringe Pump and Heating for MIST CVD Applications
The MSKUSP17SP ultrasonic atomizing generator is engineered to facilitate aerosol-assisted chemical vapor deposition (AACVD), also known as MIST CVD, enabling the synthesis of nanostructured oxide materials. This system is particularly suited for integration with tubing furnaces and electrostatic precipitators to form a comprehensive setup for advanced material fabrication.
At its core, the device employs a 1.7 MHz ultrasonic transducer that produces fine aerosol droplets typically smaller than 10 microns, with droplet size influenced by solution viscosity, ultrasonic frequency, and carrier gas velocity. The atomizer features three selectable power levels (low, medium, high) and supports both continuous and timed operation modes, with timing adjustable from 30 to 180 minutes.
주요 기능
- 316 stainless steel liquid container with fluoropolymer sealing and integrated heating tape for temperature control.
- Digital syringe pump compatible with syringes ranging from 10 µL to 60 mL, allowing precise infusion rates adjustable during operation.
- Infusion rates span from 3.9 µL/min up to 76.5 mL/min depending on syringe size, with selectable units (mL/hr, µL/hr, mL/min, µL/min).
- Temperature controller employing PID via SSR for accurate heating with ±1 ºC precision and over-temperature protection with alarm.
- Quick-release clamps enable easy disassembly for cleaning or system adaptation.
- Universal input voltage compatibility (110-240 VAC) with 24 VDC ultrasonic generator drive.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Ultrasonic Frequency | 1.7 MHz |
| Power Consumption | 30 W |
| Power Output Levels | 3 (Low, Medium, High) |
| Droplet Size | Less than 10 microns (dependent on solution viscosity and gas speed) |
| Voltage Input | 110-240 VAC (Ultrasonic generator driven by 24 VDC) |
| Liquid Container Material | 316 Stainless Steel with fluoropolymer sealing ring |
| Heating Tape | 24″ length, 1/2″ width, 120 VAC, max 105 W, max 80°C |
| Syringe Pump Capacity | 10 µL to 60 mL syringes |
| Pump Rate Range | 3.9 µL/min to 76.5 mL/min (depending on syringe size) |
| Temperature Control Accuracy | ±1 ºC with PID SSR control |
| Thermocouple | K-type, 3 mm OD x 4″ length (included) |
대표적인 적용 분야
This ultrasonic atomizing generator is ideal for aerosol-assisted chemical vapor deposition processes to produce nanostructured oxide films and powders. It is commonly used in research and development laboratories focusing on advanced material synthesis, thin film deposition, and catalyst preparation. The system can be integrated with tubing furnaces and electrostatic precipitators for enhanced material processing workflows.
구성 및 작동 안내
The device includes a digital syringe pump with memory for previous settings and power failure recovery, ensuring continuous infusion without interruption. Quick clamps facilitate easy maintenance and component replacement. An optional heatable glass syringe is available for enhanced temperature control of the injected solution. For carrier gas flow regulation, a mass flow controller (MFC) can be connected upstream. Safety features include over-temperature protection with audible alarm, allowing unattended operation within set parameters.
