MSK-ESPS-60KV High Voltage Power Supply for DIY Electrospinning with 60 kV DC Output and Digital Display
The MSK-ESPS-60KV is engineered to provide a stable and adjustable high voltage DC output essential for electrospinning processes in laboratory and DIY settings. Electrospinning requires precise voltage control to generate fine polymer fibers from liquid solutions, and this power supply delivers up to 60 kV with a maximum current of 2.5 mA to meet these demands.
This unit operates from a 208-240V AC input and converts it to a high voltage DC output. It includes a digital voltmeter and ammeter on the front panel, allowing users to set and monitor output voltage and current accurately via control knobs. The device supports both constant voltage and constant current modes, providing flexibility for different electrospinning protocols. Safety features include a built-in arc protection circuit to prevent damage from electrical discharges.
주요 기능
- Adjustable DC output voltage from 0 to 60 kV with digital display.
- Maximum output current of 2.5 mA suitable for electrospinning applications.
- Front panel knobs for precise voltage and current setting.
- Dual operation modes: constant voltage and constant current.
- Built-in arc protection circuit enhances operational safety.
- Compatible with 208-240V AC input power; optional transformer available for 110V operation.
- Includes power inlet and outlet cables for immediate setup.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Input Power | 208 – 240 V AC, 50/60 Hz |
| Max Power Consumption | 150 W |
| Output Voltage | 0 – 60 kV DC |
| Max Output Current | 2.5 mA |
| Display | Digital voltmeter and ammeter |
| Operation Modes | Constant Voltage / Constant Current |
| Safety Features | Built-in arc protection circuit |
| Operating Environment | Temperature 0 – 50 °C, Humidity 10 – 80% RH |
| Dimensions (L×W×H) | 214 mm × 285 mm × 67 mm |
대표적인 적용 분야
This power supply is ideal for laboratory-scale electrospinning setups where controlled high voltage is critical to producing nanofibers from polymer solutions. It supports DIY electrospinning devices and can be integrated with syringe pumps and collectors for fiber deposition. The unit is suitable for research and development in materials science, tissue engineering, and filtration membrane fabrication.
구성 및 작동 안내
The MSK-ESPS-60KV includes power inlet and outlet cables for immediate connection. Users should perform grounding tests (GFCI) before initial operation to prevent charge accumulation and potential damage. For operation at 110 VAC, a 200W transformer is available as an optional accessory. Additional equipment such as syringe pumps, drum collectors, and X-Y stages can be ordered separately to complete an electrospinning system. It is recommended to operate the device within a fume hood for safety and health considerations.
