KSL1100MW-1100 Programmable Microwave Furnace with Up to 1100ºC Max Temperature and 100ºC/Min Heating Rate
The KSL1100MW-1100 microwave furnace is engineered for laboratory applications requiring rapid and controlled high-temperature processing, such as calcining and sintering of magnetic or oxide electronic materials. It leverages microwave energy combined with precision temperature control to achieve fast heating cycles, reaching temperatures up to 1100ºC with a maximum heating rate of 100ºC per minute.
This furnace integrates silicon carbide (SiC) foam as the microwave susceptor heating element, housed within a fibrous alumina thermal insulation casing to optimize energy efficiency and temperature uniformity. The stainless steel exterior casing provides effective shielding against microwave radiation, ensuring safe operation. Temperature control is managed by a programmable controller capable of 30 segments, allowing users to define heating rates, dwell times, and cooling profiles with an accuracy of ±5ºC.
주요 기능
- Maximum operating temperature of 1100ºC with continuous operation up to 1000ºC.
- Programmable temperature controller with 30 segments for precise heating and cooling cycles.
- SiC foam heating elements acting as microwave susceptors for efficient rapid heating.
- Stainless steel casing designed to shield microwave radiation effectively.
- Heating rate programmable up to 100ºC per minute, enabling fast thermal processing.
- Includes one Al2O3 crucible as a microwave susceptor insert; optional SiC graphite crucibles available.
- Vacuum casting thermal insulation material for enhanced energy saving.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Microwave Frequency | 2.45 GHz ±25 MHz |
| Microwave Output Power | 700W, 1000W, or 1800W selectable |
| Maximum Working Temperature | 1100ºC |
| Continuous Working Temperature | 1000ºC |
| Heating Rate | 0 to 100ºC/min programmable (typical operation up to 60ºC/min) |
| Temperature Controller | 30-segment programmable SCR controller, ±5ºC accuracy |
| Thermocouple Type | K-Type |
| Heating Element Material | Silicon Carbide (SiC) foam |
| Thermal Insulation | Fibrous alumina casing with vacuum casting insulation |
| Power Supply | AC110V, single phase, 50/60 Hz (1000W version); AC208-240V, single phase, 50/60 Hz (3000W version) |
| Microwave Leakage | ≤1 mW/cm² |
대표적인 적용 분야
This microwave furnace is well suited for rapid thermal processing tasks such as calcining and sintering of magnetic materials and oxide electronic components. Its fast heating capability and programmable temperature profiles make it ideal for research and development laboratories focusing on advanced material synthesis and thermal treatment.
구성 및 작동 안내
- The furnace includes one Al2O3 crucible as a microwave susceptor insert; SiC graphite crucibles are available as optional accessories.
- Operators should wear thermal gloves during handling and operate the furnace inside a fume hood for safety.
- Maintain a clearance of at least 0.5 meters between the microwave furnace and the temperature control unit to avoid electromagnetic interference.
- Remove the thermocouple before detaching the microwave heater to prevent damage.
- Allow the furnace to cool below 200ºC before removing or servicing the heating elements.
- Store the microwave heater in a dry environment; moisture can adversely affect microwave heating performance.
