GSL-1200X-MGI-8 Compact 8-Channel Tube Furnace with 20mm Quartz Tubes for High-Throughput Annealing up to 1200°C
The GSL-1200X-MGI-8 is engineered to facilitate high-throughput heat treatment experiments, enabling researchers to process eight samples simultaneously under independently controlled temperatures. This compact tube furnace is particularly suited for advanced studies on alloys and ceramics, including phase diagram investigations in new generation materials.
Each of the eight heating modules contains a high-purity quartz tube with an outer diameter of 20mm and length of 192mm, separated by insulation and air cooling layers to prevent thermal interference. The system supports continuous operation at 1100°C and short-term peaks up to 1200°C, with precise temperature stability within ±2°C in the central 20mm zone.
주요 기능
- Eight independent heating channels with separate temperature control up to 1200°C.
- High-purity quartz tubes (20mm O.D. x 17mm I.D. x 192mm L) included for each module.
- Quick-seal flanges with integrated gas inlet/outlet and vacuum ports for controlled atmosphere processing.
- Programmable 30-segment temperature controllers with K-type thermocouples for precise thermal management.
- PC software interface enabling simultaneous control and monitoring of all eight channels.
- Vacuum capability down to 10^-5 torr with appropriate pumps and gas flow control options.
- Compact design allowing efficient use of laboratory space for multi-sample processing.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Furnace Modules | 8 independent tube furnace modules |
| Quartz Tube Dimensions | 20mm O.D. x 17mm I.D. x 192mm length |
| 최고 기온 | 1200°C (up to 1 hour) |
| Continuous Operating Temperature | 1100°C |
| 온도 안정성 | ±2°C within 20mm cubic zone; ±5°C within 55mm cubic zone |
| Heating Element | NiCrAl alloy wire |
| 온도 제어 | 30-segment programmable controller per channel, K-type thermocouples |
| Heating Rate | Up to 10°C/min |
| Power Supply | 2.5 kW, 208-240V single phase, 50/60Hz (with 4 modules operating simultaneously) |
| Vacuum Capability | Down to 10^-2 torr (mechanical pump), 10^-5 torr (turbopump) |
| Gas Ports | 1/8″ gas inlet/outlet with optional needle valves for flow control |
| Software | PC control software included for multi-channel management |
대표적인 적용 분야
This furnace is ideal for research requiring simultaneous annealing of multiple samples under controlled atmospheres, such as phase diagram studies, alloy and ceramic material development, and high-throughput thermal processing experiments.
구성 및 작동 안내
The system includes eight quartz tubes with quick-seal flanges equipped with vacuum and gas ports. A single vacuum pump can serve all modules via an 8-to-1 adapter. Optional needle valves and gas manifold systems are available for precise gas flow control. Users must install a pressure regulator on gas tanks to maintain pressure below 7.5 PSI (0.5 atm). The power cable is supplied without a plug; users should install an appropriate plug locally. Additional accessories such as a laptop with Windows 10 and LabVIEW-based temperature control software can be purchased separately to enhance operation and data management.
