DZF6050 53L Vacuum Oven with Digital PID Controller, 200°C Max Temp, KF25 Port & Manual Leak Valve
The DZF6050 vacuum oven is designed for laboratory applications requiring controlled heating under reduced pressure, such as drying heat-sensitive materials or removing solvents without oxidation. Its 53-liter stainless steel chamber accommodates moderate sample loads with internal dimensions of 415 mm length, 345 mm height, and 373 mm depth. The oven achieves vacuum levels down to less than 8 mTorr at room temperature after bake-out, enabling efficient moisture and gas removal from samples.
Temperature control is managed by a single-point PID digital controller with ±1°C accuracy, allowing continuous operation from room temperature plus 10°C up to 200°C. The oven features a KF25 vacuum port compatible with standard vacuum pumps (mechanical pump not included) and includes a manual leak valve for controlled venting. The door seals with a silicone gasket and positive latch to maintain vacuum integrity, while a double-layer window of tempered glass and polycarbonate allows sample observation without breaking vacuum.
주요 기능
- 53-liter stainless steel chamber with two-layer sample racks
- Temperature range: RT+10°C to 200°C with ±1°C control accuracy
- Vacuum capability: <50 mTorr at 200°C, <8 mTorr at room temperature after bake-out
- KF25 vacuum port with barbed fitting adapter and quick clamp included
- Manual adjustable leak valve for precise venting
- Double-layer tempered glass and polycarbonate window for safe viewing
- Available in 110V ETL-certified or 220V CE-certified versions
기술 사양
| 매개변수 | 사양 |
|---|---|
| Chamber Dimensions (L×H×D) | 415 × 345 × 373 mm |
| Chamber Volume | 53 Liters |
| 재료 | Stainless steel chamber with silicone gasket door seal |
| Max Temperature | 200°C continuous |
| Temperature Accuracy | ±1°C |
| 온도 균일도 | ±5°C at 100°C, 25″ Hg vacuum over 8″×6.5″ area |
| Vacuum Port | KF25 with barbed fitting and quick clamp (included) |
| Ultimate Vacuum | <50 mTorr at 200°C, <8 mTorr at room temperature after bake-out |
| Power Supply | 110-120 V 50/60 Hz (ETL certified) or 208-240 V (CE certified) |
| Power Consumption | 1400 VA |
| 무게 | 149 lb (approx. 67.5 kg) |
대표적인 적용 분야
- Drying and curing of heat-sensitive materials under vacuum
- Battery electrode fabrication and research
- Perovskite solar cell substrate treatment
- Removal of solvents and moisture from samples
- General laboratory vacuum drying and thermal processing
구성 및 작동 안내
- Standard package includes barbed fitting to KF25 adapter and KF25 quick clamp with rubber O-ring
- Mechanical vacuum pump is not included and must be sourced separately
- Optional accessories: 1-meter KF-D25 flexible stainless steel vacuum bellows, spare silicone door gasket
- An optional 4-pin electrical feedthrough can be installed on the oven side at extra cost
- Stainless steel chamber surface may slightly deform or dull during high-temperature vacuum operation without affecting performance
- Samples should not be placed directly on the chamber bottom to ensure temperature uniformity
