OTF1200XIIIR5L Three Zone Rotary Tube Furnace with 1100°C Max Temperature, 900 mm Heating Length, and Adjustable Tilt
The OTF1200XIIIR5L rotary tube furnace is engineered to support advanced laboratory processes such as powder dehydration, surface modification, chemical vapor deposition (CVD), physical vapor deposition (PVD), and various chemical reactions. Its design accommodates samples including lithium-ion battery cathodes and anodes, environmental specimens, and mineral materials, providing a versatile solution for research and development applications.
This furnace incorporates a rotary quartz tube equipped with mixing blades to ensure uniform sample treatment. The heating section is divided into three independently controlled zones spanning a total length of 900 mm, allowing precise temperature gradients and process control. The unit supports a maximum temperature of 1100°C at ambient pressure and up to 1000°C under vacuum conditions, with a heating rate of up to 10°C per minute.
주요 기능
- Rotary quartz tube (Ø60 × Ø130 × 1600 mm) with internal mixing blades for enhanced sample agitation.
- Three heating zones each 300 mm in length, totaling 900 mm for flexible thermal profiling.
- Variable rotary speed adjustable from 1 to 10 rpm and tilting angle from 0 to 15° for optimized sample processing.
- PID programmable temperature controller with 50 programmable segments and ±1°C accuracy.
- Double shell casing with fibrous alumina insulation and three cooling fans for thermal stability and safety.
- Integrated flanges with gas inlet/outlet fittings, needle valves, pressure gauge, and magnetic fluid dynamic seal for controlled atmosphere operation.
- Optional vacuum system with a 156 L/min double stage rotary vane vacuum pump and LabVIEW-based temperature control software with laptop.
기술 사양
| 매개변수 | 사양 |
|---|---|
| Maximum Working Temperature | 1100°C (ambient pressure), 1000°C (vacuum) |
| Heating Length | 900 mm (3 zones × 300 mm each) |
| Heating Element | NiCrAl:Mo |
| Rotary Speed | 1–10 rpm (variable) |
| Tilting Angle | 0–15° (electrically adjustable) |
| 온도 제어 | PID controller, 50 programmable segments, ±1°C accuracy, RS485 MODBUS communication |
| Furnace Construction | Double shell casing with fibrous alumina insulation and three cooling fans |
| Rotary Tube Dimensions | Quartz tube Ø60 × Ø130 × 1600 mm; tumbling zone Ø130 × 700 mm; effective volume 1800–2250 ml |
| Working Voltage | AC 208–240 V, Single Phase, 50 Hz (30A breaker required) |
| Output Power | 7.0 kW |
| Tube Pressure Limit | Less than 3 psig |
대표적인 적용 분야
This rotary tube furnace is suited for thermal processing tasks such as dehydration of powders, surface treatments, chemical vapor deposition (CVD) and physical vapor deposition (PVD) processes, and controlled chemical reactions. It is particularly applicable for lithium-ion battery research involving cathode and anode materials, as well as environmental and mineral sample preparation.
구성 및 작동 안내
The furnace includes a rotary quartz tube with mixing blades and flanges equipped with gas inlet/outlet fittings, needle valves, and magnetic fluid dynamic seals to maintain controlled atmospheres. An optional vacuum system with a double stage rotary vane pump is available for processes requiring reduced pressure. Temperature control software based on LabVIEW can be supplied with a dedicated laptop for programming, monitoring, and data recording. Electrical installation requires a single-phase 208–240 V power supply with a 30A breaker. Users should ensure proper ventilation and follow safety protocols when operating at high temperatures and with reactive gases.
