YLJ-100M Manual Hydraulic Press with 100 Metric Tons Capacity and Safety Protection Door
The YLJ-100M is designed for laboratory pressing tasks requiring high force, such as preparing compound or ceramic samples. It delivers a maximum pressing force of 100 metric tons (980 kN), making it suitable for applications demanding substantial pressure without electrical power. This manual hydraulic press is ideal for low-cost sample preparation where precise control and safety are priorities.
Operation is facilitated by a separated manual hydraulic pump equipped with a pressure gauge, allowing straightforward pressure monitoring and maintenance. The press features a built-in protection door to ensure operator safety during pressing cycles. The bottom hydraulic cylinder has a travel distance limited to 20 mm, controlled by a range sensing switch to prevent overtravel and potential damage.
주요 기능
- Maximum pressing force of 100 metric tons (980 kN) for high-pressure sample preparation
- Separated manual hydraulic pump with integrated pressure gauge for easy operation and maintenance
- Built-in safety protection door to prevent accidental injury during pressing
- Bottom hydraulic cylinder travel distance limited to 20 mm with range sensing switch to avoid overtravel
- Adjustable top support screw height up to 310 mm for accommodating various sample sizes
- Optional 32-position pressing die adapter available for high-throughput pellet production (sold separately)
- Compatible with various pellet press dies and cold isostatic pressing (CIP) dies available upon request
기술 사양
| 매개변수 | 사양 |
|---|---|
| Maximum Pressing Force | 100 Metric Tons (980 kN) |
| Hydraulic Pump | Manual, separated with pressure gauge |
| Bottom Hydraulic Cylinder Travel Distance | 0 – 20 mm (range sensing switch included) |
| Top Support Screw Adjustable Height | 310 mm |
| Safety Features | Built-in protection door, travel limit switch |
| Compliance | No NRTL certification required (manual operation, no electricity) |
대표적인 적용 분야
This press is commonly used in laboratories for preparing ceramic pellets, compound samples, and other materials requiring high-pressure manual pressing. It is suitable for research and development environments where electrical power is unavailable or undesired, and safety is a priority.
구성 및 작동 안내
Operators should regularly check and maintain the hydraulic oil level, using AW 46 hydraulic oil when needed. The bottom cylinder must not exceed its maximum travel distance of 20 mm to avoid damage. Protective goggles are mandatory during operation. The oil release valve and oil drain should be closed during transportation or extended idle periods. Use inside a glove box is not recommended. Optional accessories include a 32-position pressing die adapter and various pellet press dies, which are sold separately.
