KSL1200XNUAD 1200°C Automated Muffle Furnace with Motorized Upward-Opening Door, 23L Chamber, PC-Controlled Multi-Unit Operation
The KSL1200XNUAD is designed for laboratories requiring precise, automated high-temperature sintering processes with minimal manual intervention. Its 23-liter alumina fiber chamber accommodates various sample sizes, while the motorized upward-opening door facilitates safe and efficient loading and unloading. This furnace is ideal for workflows demanding repeatable thermal treatments controlled remotely or integrated into automated material research systems.
Operating up to 1200°C for short durations and continuously at 1100°C, the furnace uses FeCrAl-Mo doped heating elements and a K-type thermocouple to ensure uniform temperature distribution within ±5°C over a central zone of 130x150x130 mm. The system employs a PID controller with 50 programmable stages, enabling complex temperature profiles. Communication interfaces including RJ45 with MODBUS RTU protocol and DB9 port allow integration with external instruments and automation platforms.
주요 기능
- Automated sintering cycle controlled via included PC and software, supporting door operation, ramping, dwelling, and cooling
- Motorized upward-opening door for safe and ergonomic sample handling
- Dual-layer shell with high-purity alumina fiber insulation for thermal efficiency
- Uniform heating zone of 130x150x130 mm within ±5°C accuracy
- PID temperature control with 50 programmable stages and ±1°C accuracy (optional ±0.1°C)
- Supports simultaneous control of up to 8 furnace units from one computer
- Optional integration with robotic arms for fully automated sample loading and retrieval
기술 사양
| 매개변수 | 사양 |
|---|---|
| 최고 기온 | 1200°C (up to 30 minutes) |
| Continuous Operating Temperature | 1100°C |
| Chamber Dimensions (W×D×H) | 250×300×250 mm (23 L) |
| Heating Elements | FeCrAl-Mo doped |
| Heating Rate | ≤10°C/min |
| Temperature Sensor | K-type thermocouple |
| Uniform Temperature Zone | 130×150×130 mm within ±5°C |
| 온도 제어 | PID controller, 50 programmable stages, ±1°C accuracy (optional ±0.1°C) |
| Communication Interfaces | RJ45 (MODBUS RTU), DB9 port |
| Power Supply | AC220V ±10%, 50/60 Hz (standard); AC380V ±10%, 50/60 Hz (optional) |
| Power Consumption | 6.5 kW |
| Dimensions (W×D×H) | 720×700×960 mm (door closed); 720×700×130 mm (door open) |
| 무게 | 500 lb |
| Furnace Chamber Material | High-purity alumina fiber |
| Shell Structure | Dual-layer insulation shell |
| Included Accessories | One laptop with pre-installed control software, 3-meter power cable (no plug) |
대표적인 적용 분야
This furnace is suited for automated sintering, heat treatment, and material processing tasks in research labs focusing on ceramics, metals, and advanced materials. Its programmable control and automation compatibility make it ideal for AI-driven materials science workflows requiring precise thermal cycling and unattended operation.
구성 및 작동 안내
- Optional robotic arm integration enables fully automated sample loading and retrieval.
- Remote control capability available via router (sold separately).
- Ensure proper electrical supply matching selected voltage option.
- Safety certifications include CE; NRTL or CSA certification available upon request.
