KSL-1200X-M-AD Automated 1200°C Muffle Furnace with Motorized Door, 27L Chamber, PC-Controlled Multi-Furnace Operation
The KSL-1200X-M-AD is engineered for laboratories requiring precise and automated high-temperature sintering and heat treatment processes. Its 27-liter cubic chamber (300×300×300 mm) accommodates a variety of sample sizes, enabling efficient batch processing. This furnace is particularly suited for workflows demanding unattended operation with programmable temperature profiles and integrated door control.
Operating up to 1200°C for limited durations and continuously at 1100°C, the furnace employs a motorized door mechanism synchronized with a PC-based control system. This setup allows users to execute complete thermal cycles—including door closing, temperature ramping, soaking, cooling, and door opening—with a single command. The system supports simultaneous management of up to eight furnaces from one computer, facilitating scalable automation in material processing labs.
주요 기능
- Automated box furnace with motorized door for hands-free operation
- Maximum temperature: 1200°C (up to 60 minutes), continuous operation at 1100°C
- 27-liter heating chamber with uniform temperature zone of 150×150×150 mm ±5°C
- Programmable PID temperature controller with 30 segments and ±1°C accuracy (optional ±0.1°C upgrade)
- PC included with pre-installed software enabling one-click automated sintering cycles
- RJ45 interface with MODBUS RTU protocol for communication and control
- Optional integration with collaborative robotic arm for automated sample handling
기술 사양
| 매개변수 | Details |
|---|---|
| Heating Chamber Dimensions | 300 × 300 × 300 mm (27 L) |
| Maximum Operating Temperature | 1200°C (less than 60 minutes) |
| Continuous Operating Temperature | 1100°C |
| 온도 균일도 | ±5°C within 150 × 150 × 150 mm zone |
| Heating Rate | Up to 10°C/min |
| 온도 제어 | PID controller, 30 programmable segments, ±1°C accuracy standard, optional ±0.1°C |
| Thermocouple Type | Type K |
| Furnace Housing | Dual-layer with high-purity alumina fiber insulation |
| Door Operation | Motorized automatic opening and closing |
| Power Supply | AC 220V ±10%, 50/60 Hz, 7.5 kVA |
| Communication Interface | RJ45 with MODBUS RTU protocol |
| 무게 | Approx. 500 lb (226.8 kg) |
대표적인 적용 분야
This furnace is ideal for automated sintering, heat treatment, and material processing tasks in research and development laboratories. It supports workflows requiring precise temperature control and unattended operation, such as ceramics sintering, metal annealing, and advanced materials testing.
구성 및 작동 안내
- The furnace includes a PC with pre-installed control software enabling one-click execution of programmed thermal cycles.
- Supports simultaneous control of up to eight furnaces from a single computer for scalable automation.
- Gas inlet (6.35 mm) and outlet (30 mm) ports allow introduction of inert gases to the chamber.
- Optional collaborative robotic arm can be integrated for automated sample loading and unloading; robotic arm sold separately.
- Power cable (3 m) included without plug; ensure compatibility with local power standards.
Compliance & Certification
The KSL-1200X-M-AD is CE certified. Additional certifications such as NRTL or CSA are available upon request.
