MSK-520-L Large Automatic Roll-to-Sheet Slitting Machine for Electrodes Cutting with Auto-Tension Control and PLC Touch Screen
The MSK-520-L is engineered to convert electrode material rolls into precisely cut sheets, a critical step in battery manufacturing and electrode preparation. It accommodates electrode widths ranging from 10 mm up to 400 mm, enabling versatile processing of various electrode sizes. This machine is ideal for applications requiring consistent sheet lengths and high cutting accuracy.
Equipped with an automatic tension control system, the MSK-520-L maintains minimal tension of 10 N to ensure smooth material feeding and prevent deformation during cutting. The integrated PLC touch screen control panel facilitates easy operation and fine adjustments, including minor edge corrections for continuous cutting. The machine supports a linear cutting speed adjustable between 1 and 5 meters per minute, powered by a single-phase 220V AC supply with a maximum power consumption of 500 W.
Key Features
- Automatic tension control system ensuring consistent material feed with minimal tension of 10 N.
- Wide cutting width range from 10 mm to 400 mm suitable for various electrode sizes.
- Continuous fixed-length cutting mode with minor edge adjustment capability for precise slitting.
- PLC touch screen interface for intuitive control and parameter setting.
- Cutting accuracy within ±0.3 mm for high precision output.
- Supports electrode roll diameters up to 250 mm maximum outer diameter.
- Operates on single-phase AC 220V ±10%, 50/60 Hz power supply with 500 W maximum consumption.
Technical Specifications
| Parameter | Specification |
|---|---|
| Working Voltage | AC 220V ±10%, single phase, 50/60 Hz |
| Max. Power Consumption | 500 W |
| Acceptable Electrode Width | 10 mm to 400 mm |
| Cutting Accuracy | ±0.3 mm |
| Tension Control | Minimum 10 N |
| Linear Speed for Cutting | 1 to 5 m/min |
| Maximum Electrode Roll Diameter | 250 mm O.D. |
| Compressed Air Requirement | 0.5 to 0.8 MPa (air compressor not included) |
Typical Applications
The MSK-520-L is primarily used in battery research and production environments for cutting electrode rolls into sheets with precise dimensions. It is suitable for preparing electrodes for lithium-ion batteries, supercapacitors, and other electrochemical devices where consistent sheet size and quality are critical.
Configuration & Operating Notes
The machine requires an external compressed air source operating between 0.5 and 0.8 MPa for proper tension control; an air compressor is not included and must be sourced separately. If using a gas cylinder instead of an air compressor, a two-stage pressure regulator must be installed to ensure safe operation within the specified pressure range. The MSK-520-L includes a PLC touch screen for operational control and minor cutting edge adjustments. Proper storage and maintenance are essential to avoid rust and damage, which are not covered under warranty.
