YLJ-HP-100E 5T Electric Mechanical Laminating Heating Press with 500°C Max Temperature and 135×135 mm Sample Capacity
The YLJ-HP-100E is engineered for laboratory tasks requiring precise lamination and pressing of flat-panel samples, such as wafer welding and film transfer. It accommodates samples up to 135 mm by 135 mm with a thickness of 40 mm, making it suitable for advanced materials research including ceramics, new energy materials, superconductors, and building materials. Additionally, it supports pressure variation measurements on pouch-type solid-state batteries during charge-discharge cycles.
This electric mechanical hot press operates without hydraulic oil, delivering a maximum pressing force of 5 tons and reaching temperatures up to 500°C. Its compact design allows integration inside gloveboxes for inert atmosphere processing. A higher temperature version up to 750°C is available upon request.
Wichtigste Merkmale
- Two heat-resistant mold steel platens (135×135 mm) with flatness ≤0.02 mm at cold state.
- Independent temperature control for upper and lower platens with PID control and ±5°C accuracy.
- Maximum continuous working temperature of 450°C with recommended heating rate of 5°C/min.
- Pressing force adjustable from 3 kg to 5000 kg with ±3 kg precision and selectable automatic or manual modes.
- Programmable control system supporting up to 30 temperature segments and pressure retention times.
- Optional water cooling for platens to prevent overheating and enable rapid cooling.
- Capability to connect with battery analyzers for in situ pressure monitoring during battery cycling.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Maximum Pressing Force | 5 Tons (5000 kg) |
| Maximum Operating Temperature | 500°C (up to 30 minutes) |
| Sample Size Capacity | 135 mm × 135 mm × 40 mm |
| Heizelemente | 8 U-shaped 450W heating tubes (4 upper, 4 lower) |
| Genauigkeit der Temperaturregelung | ±5°C (±3°C at 500°C constant) |
| Pressing Force Range | 3–5000 kg with ±3 kg accuracy |
| Stromversorgung | 220 VAC, 50 Hz |
| Stromverbrauch | 3700 W |
| Pressurization Modes | Automatic and Manual selectable |
| Upper Ball Screw Travel | 40 mm |
Typische Anwendungsbereiche
The YLJ-HP-100E is widely used in pressing and laminating tasks for ceramics, novel materials, superconductors, and building materials. It is particularly suited for research and development in battery technology, including measuring pressure changes in pouch-type solid-state batteries during charge and discharge cycles. Its compatibility with glovebox environments enables processing under inert atmospheres such as argon gas.
Hinweise zur Konfiguration und zum Betrieb
The press includes a precise temperature control system with PID regulation and safety features such as overtemperature and circuit break protection. For glovebox integration, a KF 40 feedthrough is required if the temperature control box is placed outside the glovebox; this is available optionally. Water cooling platens and a compatible water chiller are optional accessories to prevent overheating and enable rapid cooling cycles. Additionally, software for PC connection is available to program parameters and export experimental data. The system can interface with battery analyzers for advanced battery pressure monitoring.
