VTC200-GBII Dual-Chamber Glove Box with Integrated Spin Coater and Gas Purification System for Ultra-Low O2 and H2O Environment
The VTC200-GBII is engineered to support laboratory processes requiring stringent control of oxygen and moisture levels, particularly for fabricating sensitive materials such as perovskite solar cells. It features a dual-chamber glove box design with a dedicated recessed compartment to house a spin coater, enabling sample processing in an inert atmosphere with oxygen and water vapor concentrations maintained below 1 ppm.
This system integrates a gas purification unit with automatic purging and regeneration capabilities to rapidly remove contaminants. The glove box chamber is constructed from stainless steel 304 with tempered safety glass panels, providing both durability and visibility. The spin coater, made from corrosion-resistant polypropylene, is positioned inside the recessed box and controlled digitally from outside the glove box, facilitating safe and efficient operation.
Wichtigste Merkmale
- Dual-chamber glove box with stainless steel 304 construction and tempered glass window for safe handling.
- Integrated gas purification system maintaining O2 and H2O levels below 1 ppm with automatic purging and regeneration.
- Recessed compartment (314 mm ID x 455 mm depth) designed to house the spin coater inside the glove box.
- Spin coater components made of polypropylene to resist corrosive solutions; vacuum chuck supports substrates up to 6″ diameter.
- Programmable spin speeds ranging from 500 to 8000 RPM with six segments via external digital control panel.
- Includes an oilless vacuum pump and filter to prevent wastewater contamination of the pump.
- Optional upgrades available: heating cover with temperature control up to 120°C, precision pipette, plasma cleaner, and heatable antechamber.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Betriebsspannung | 110 VAC or 220 VAC, 50/60 Hz, Single Phase |
| Stromverbrauch | 2700 W |
| Glove Box Dimensions (L×W×H) | 2400 mm × 800 mm × 930 mm |
| Glove Box Material | Stainless Steel 304 with 12 mm double-layer laminated safety glass |
| Glove Box Features | Openable left-front tempered glass window, built-in fluorescent lamp, two slidable shelves (300×250×300 mm) |
| Gas Purification | Maintains O2 and H2O below 1 ppm with automatic purging and regeneration |
| Recessed Box Dimensions | 314 mm inner diameter × 455 mm depth |
| Spin Coater Material | Polypropylene (case and spin disk) |
| Spin Coater Chamber Diameter | 150 mm |
| Vacuum Chuck Diameter | 100 mm (supports substrates up to 6″ diameter) |
| Spin Speed Range | 500 to 8000 RPM, programmable with six segments |
| Steuerung | Digital control box located outside glove box |
| Vakuumpumpe | Oilless vacuum pump with included filter |
Typische Anwendungsbereiche
Ideal for preparing moisture- and oxygen-sensitive materials such as perovskite solar cells, thin film coatings, and other advanced materials requiring inert atmosphere processing. The integrated spin coater enables uniform thin film deposition under controlled environmental conditions.
Hinweise zur Konfiguration und zum Betrieb
The spin coater is installed inside the glove box’s recessed chamber, while the control unit and vacuum pump are positioned externally and connected via feed-throughs for ease of operation and maintenance. Optional accessories include a heating cover with digital temperature control for in situ sample drying, precision pipettes for improved coating accuracy, and plasma cleaners for substrate surface treatment. A heatable antechamber is also available to facilitate sample transfer without compromising the glove box atmosphere.
Users should note that gloves are consumable and not covered under warranty. Proper maintenance and storage are essential to prevent rust and damage. Certification options such as NRTL or CSA can be provided upon request at additional cost.
Maße & Versand
| Product dimensions | 2400mm(L) x 800mm(W) x 930mm(H) |
|---|
