SPG-6A-I Desktop High-Frequency Induction Heater with 6KW Power, 100-500kHz Frequency, for Small-Scale Metal Melting
This unit operates at a high-frequency range of 100 to 500 kHz, enabling fast and uniform heating through electromagnetic induction. The heater delivers a maximum output power of 6 kilowatts, with an adjustable input current from 5 to 30 amps, displayed digitally for accurate control. It supports continuous operation with a 100% duty cycle and offers both manual and automatic timer controls for heating, dwell, and cooling phases.
Wichtigste Merkmale
- High-frequency induction heating from 100 to 500 kHz for efficient metal processing.
- Adjustable input current (5-30A) with digital display for precise power control.
- Selectable manual (foot pedal) or automatic timer control with adjustable heating, dwell, and cooling times (1-99 seconds each).
- Air-cooled via rear fan; optional water chiller available for enhanced cooling performance.
- Includes one copper induction coil (20mm diameter x 45mm height) made from 5mm diameter copper tubing; custom coils available at extra cost.
- Built-in protection against over-pressure and over-temperature to ensure safe operation.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Betriebsspannung | 180 – 245 V AC, 50-60 Hz, Single Phase |
| Max. Output Power | 6KW |
| Input Current | 5 – 30 Amp (50A breaker required), Adjustable with digital display |
| Output Frequency | 100 – 500 kHz |
| Duty Cycle | 100% |
| Max. Sample Weight | 100 g |
| Timer Control | Automatic or Manual (foot pedal); Heating, Dwell, Cooling time adjustable 1-99 seconds |
| Cooling Method | Air cooling via rear fan; Optional water chiller (flowrate > 3 L/min, pressure ≥ 0.2 MPa) |
| Induction Coil | One coil included: 5mm diameter copper tube, 20mm diameter x 45mm height; Custom coils available |
| Protection Features | Over-pressure and over-temperature switches |
Typische Anwendungsbereiche
The SPG-6A-I is suited for laboratory-scale melting of small metal samples, sintering processes, annealing treatments, heat treatment cycles, and quenching operations. It is particularly useful in materials research, alloy development, and small batch metal processing where precise temperature control and rapid heating are required.
Hinweise zur Konfiguration und zum Betrieb
The heater includes one standard copper induction coil; additional or custom coils can be ordered separately to accommodate different sample sizes or shapes. While air cooling is standard, a water chiller is recommended for extended or intensive use to maintain optimal operating temperatures. The system features automatic shutdown to prevent damage if output power limits are exceeded, so users should ensure sample sizes remain within recommended limits. For melting setup and crucible recommendations, consulting technical support with alloy composition and melting parameters is advised.
