MSK-UW-D2000W Dual-Station 2000W Ultrasonic Metal Welder with Sliding Rail Fixture for Electrode Sheet Welding
The MSK-UW-D2000W ultrasonic metal welder is engineered to address the challenges of welding multiple layers of copper and aluminum electrode sheets and tabs onto current collectors, a critical step in the fabrication of Li-ion pouch cells within research and development laboratories. Its dual-station design separates anode and cathode welding processes, allowing independent adjustment of welding parameters to optimize quality and efficiency for each electrode type.
Equipped with a sliding rail fixture, this system facilitates the precise positioning and welding of pouch cells and tabs, accommodating configurations with same-side or two-side extrusion. The ultrasonic frequency is fixed at 20 kHz, delivering up to 2000 watts of adjustable ultrasonic power, capable of welding stacks of up to 25 layers. The system includes two standard welding heads and bases pre-installed for both aluminum and copper current collectors.
Wichtigste Merkmale
- Dual independent welding stations for anode and cathode with separate parameter settings.
- Sliding rail fixture supports welding of pouch cells and tabs with same-side or two-side extrusion.
- Ultrasonic frequency fixed at 20 kHz with up to 2000 W output power, adjustable for different metals.
- Welding area of 4 mm by 4 mm with two standard welding heads included.
- Preset welding programs for aluminum and copper with up to four customizable recipes per metal.
- Welding time adjustable from 0.01 to 1 second for precise control.
- CE certified with optional NRTL certification available.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Eingangsspannung | 220 V AC ±10%, einphasig, 50/60 Hz |
| Input Power Consumption | 2600 W |
| Ultrasonic Output Power | Up to 2000 W, adjustable |
| Ultrasonic Frequency | 20 kHz |
| Welding Area | 4 mm (L) x 4 mm (W) |
| Welding Time Range | 0.01 to 1 second, adjustable |
| Maximum Layers Welded | Up to 25 layers of copper or aluminum sheets |
| Pouch Cell Tab Dimensions (Same Side Extrusion) | Length: Max 380 mm, Min 6 mm; Width: Max 210 mm, Min 6.5 mm, Max Width 206.5 mm |
| Pouch Cell Tab Dimensions (Two-Side Extrusion) | Length: Max 380 mm, Min 6 mm; Width: Max 75 mm and 50 mm on respective sides |
| Pneumatic Control | Requires 85 psi air pressure; air compressor not included |
| Zertifizierungen | CE Certified; NRTL certification available on request |
Typische Anwendungsbereiche
This ultrasonic welder is primarily used in battery research laboratories for welding electrode tabs made of copper and aluminum onto current collectors in Li-ion pouch cells. It supports welding of multiple layers, enabling fabrication of complex electrode stacks. The system is also adaptable for welding other metals such as gold, iron, nickel, and silver by adjusting welding power.
Hinweise zur Konfiguration und zum Betrieb
The system includes one set of welding heads and bases pre-installed for aluminum and copper current collectors. The sliding rail fixture accommodates pouch cells with either same-side or two-side tab extrusion. Pneumatic control requires an external air compressor supplying 85 psi; this is not included. If using a gas cylinder instead of an air compressor, a two-stage pressure regulator must be installed to ensure safe operation within the required pressure range.
