MSK-ESDC-3000 Split-Table Drum Collector with Oscillation Fixture for DIY Electrospinning
The MSK-ESDC-3000 is engineered to facilitate the collection of aligned nanofibers produced by electrospinning onto a rotating drum collector. This setup is particularly suited for researchers and developers building custom electrospinning systems aiming for higher production rates compared to traditional plate collectors. The system’s modular design allows separate use or combined operation of the drum collector and oscillation fixture, providing flexibility in experimental configurations.
The drum collector is made of stainless steel with an 80 mm diameter and 200 mm length, rotating at speeds adjustable between 100 and 4500 rpm with a digital speed display and ±5% accuracy. The oscillation fixture accommodates up to six syringe needles spaced in 12 mm diameter slots, enabling uniform fiber deposition by oscillating the needle array over a distance adjustable from 50 to 270 mm. The distance between the needle tips and the drum collector is recommended to be between 100 and 200 mm for optimal fiber alignment.
Wichtigste Merkmale
- Separable stainless steel drum collector (80 mm Dia. x 200 mm L) and 6-hole oscillation fixture for DIY electrospinning.
- Adjustable drum rotation speed from 100 to 4500 rpm with digital display and ±5% accuracy.
- Oscillation fixture supports up to six syringe needles with adjustable movement distance (50–270 mm).
- Manual adjustment of spacing between drum collector and oscillation fixture for process optimization.
- Compatible with 24 VDC power input and suitable for use in argon gas environments.
- Compact modular design allows flexible system assembly and component replacement.
- Requires proper grounding and safety precautions due to high-voltage operation.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Modell | MSK-ESDC-3000 (Combination of MSK-DC-3000 and MSK-MD-300) |
| Drum Collector Material | Edelstahl |
| Drum Size | 80 mm Diameter x 200 mm Length |
| Drehzahlbereich | 100 – 4500 rpm, adjustable |
| Speed Accuracy | ±5% rpm |
| Oscillation Fixture Needle Slots | 6 slots, 12 mm diameter each |
| Oscillation Movement Distance | 50 – 270 mm adjustable |
| Recommended Needle-to-Collector Distance | 100 – 200 mm |
| Leistungsaufnahme | 110–240 VAC 50/60 Hz, 50 W; 24 VDC input |
| Controller Box Dimensions | 125 mm L x 210 mm W x 105 mm H |
| Collector Part Dimensions | 430 mm L x 160 mm W x 150 mm H |
| Oscillation Fixture Controller Box Dimensions | 120 mm L x 200 mm W x 85 mm H |
| Oscillation Fixture Part Dimensions | 400 mm L x 120 mm W x 370 mm H |
Typische Anwendungsbereiche
Used in laboratory-scale electrospinning setups to produce aligned nonwoven nanofiber membranes with improved production rates. Suitable for research in polymer nanofibers, tissue engineering scaffolds, filtration membranes, and other advanced material development requiring controlled fiber alignment.
Hinweise zur Konfiguration und zum Betrieb
The MSK-ESDC-3000 can be purchased as a full set or as separate components (drum collector and oscillation fixture) to customize the electrospinning system. Additional equipment such as a high-voltage power supply, syringe pump controller, and fume hood enclosure are typically required but not included.
Proper grounding and electrical safety checks (GFCI) are mandatory before operation to prevent damage and ensure user safety. The system operates under high voltage; users must maintain safe distances from charged components and use appropriate personal protective equipment. The electrospinning process should be conducted in a well-ventilated or enclosed fume hood environment to handle potentially hazardous solvents safely.
Maße & Versand
| Product dimensions | Size; Controller box: 125mm L x 210mm W x 105mm H; Collector part: 430mm L x 160mm W x 150mm H; Controller box: 120 L x 200 W x 85H (mm); Fixture Part: 400L x 120 W x 370 H (mm) |
|---|
