MSK-AFA-HDS-150 Hybrid Film Coater with Slot Die and Doctor Blade for 100-150 mm Width Films
The MSK-AFA-HDS-150 is engineered to facilitate advanced thin film coating tasks essential in research areas such as perovskite solar cells, proton exchange membranes for fuel cells, and battery electrode fabrication. It enables precise application of films ranging from 5 to 100 microns in thickness over widths of 100 to 150 mm and lengths up to 320 mm, accommodating both tape and slot-die coating methods.
This hybrid coater integrates a vacuum chuck made from aluminum alloy with a fine perforation pattern (<1.0 mm holes) to securely hold substrates during coating. The chuck dimensions are 200 mm wide by 365 mm long and it is equipped with a bottom heater controlled digitally to maintain temperatures up to 120°C with ±1°C accuracy. The coating head combines a fixed 150 mm wide doctor blade and a removable 100 mm wide slot die, both allowing micrometer-level gap adjustments for film thickness control.
Wichtigste Merkmale
- Hybrid coating head with both 150 mm doctor blade and 100 mm slot die for versatile film application.
- Vacuum chuck with aluminum alloy construction and heating capability up to 120°C for substrate stabilization and temperature control.
- Adjustable coating gap with ±1 micron precision via dual digital micrometers.
- Digital syringe pump included for slot-die coating, supporting syringes up to 200 mL with multiple operating modes.
- Variable coating speed from 10 to 100 mm/sec controlled by a pushing bar and adjustable position switch.
- Compatible with 110 V or 208-240 V AC power supply at 50/60 Hz, consuming 1000 W.
- Includes a glass plate for coating slurry on porous substrates using vacuum suction.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Stromversorgung | 110 V or 208-240 V AC selectable, 50/60 Hz |
| Stromverbrauch | 1000 W |
| Vacuum Chuck Material | Aluminum alloy with <1.0 mm holes |
| Vacuum Chuck Dimensions | 200 mm (W) x 365 mm (L) |
| Chuck Heating Temperature | Up to 120°C, ±1°C accuracy |
| Coating Widths | Doctor blade: 150 mm; Slot die: 100 mm |
| Minimum Film Thickness | Doctor blade: 0.010 mm; Slot die: 0.005 mm |
| Coating Length | Up to 320 mm (applicator), adjustable 10-350 mm (moving length) |
| Coating Speed | 10 – 100 mm/sec variable |
| Syringe Pump Capacity | Supports syringes up to 200 mL |
| Syringe Pump Flow Rate | 1.963 μL/min (10 μL syringe) to 294.524 mL/min (200 mL syringe) |
| Syringe Pump Plunger Speed | 0.0001 cm/min (min) to 15 cm/min (max) |
Typische Anwendungsbereiche
This coater is ideal for research and development of thin films in perovskite solar cells, proton exchange membranes for fuel cells, and battery electrode coatings. It supports both porous and non-porous substrates, enabling precise control over film thickness and uniformity essential for advanced material studies.
Hinweise zur Konfiguration und zum Betrieb
The system requires an external vacuum pump, which is not included and must be ordered separately. A glass plate is provided for coating on porous substrates using vacuum suction. The coating head gap is finely adjustable with dual digital micrometers to achieve precise film thickness control. Optional accessories include multi-channel heatable syringe pumps and viscosity meters to optimize slurry properties for slot-die coating. The unit is CE certified, with additional certifications available upon request at extra cost.
