MSK-510-AR18650 Semi-Automatic Floor-Stand Crimper for Batch Sealing of 18650 Cylindrical Battery Cases
The MSK-510-AR18650 is engineered to address the need for reliable and efficient sealing of 18650 cylindrical battery cases, a critical step in battery manufacturing. It facilitates batch processing by enabling continuous crimping operations, ideal for production environments requiring consistent quality and throughput.
This floor-standing semi-automatic crimper integrates a user-friendly PLC touch screen interface for straightforward program setup and operation monitoring. The transparent front and side windows provide clear visibility of the crimping process, allowing operators to make real-time adjustments as needed. The system is designed for use in dry room conditions to maintain optimal battery case integrity.
Wichtigste Merkmale
- Patented four-step crimping sequence: two pre-deformation trials, one complete sealing trial, and one consolidation trial for superior sealing consistency.
- Optional material feeding conveyor supports batch loading of up to 22 cases, enhancing productivity.
- Operates on 380VAC three-phase power with pneumatic actuation requiring 0.5 to 0.8 MPa compressed air supply.
- CE certified ensuring compliance with relevant safety and quality standards.
- Compatible primarily with 18650 cases; custom dies available for other cylindrical cell types such as CR123, 26650, 32650, and AA upon request.
- Floor-stand design with transparent windows for process visibility and easy maintenance access.
- Throughput capacity of approximately 30 pieces per minute under optimal conditions.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Betriebsspannung | 380VAC, Three Phase, 50/60 Hz |
| Maximale Leistungsaufnahme | 4 kW |
| Driving Force | Pneumatic, requires 0.5 – 0.8 MPa compressed air (air compressor not included) |
| Steuerungssystem | PLC with touch screen HMI |
| Operational Environment | Dry room operation required |
| Productivity | Up to 30 pieces per minute |
| Kapazität für das Laden von Stapeln | Up to 22 pieces with optional feeding conveyor |
| Einhaltung der Vorschriften | CE-zertifiziert |
| Compatibility | Standard 18650 cylindrical cases; custom dies available for CR123, 26650, 32650, AA types |
Typische Anwendungsbereiche
The MSK-510-AR18650 is primarily used in battery manufacturing lines for sealing 18650 cylindrical battery cases. It is suitable for research and development labs and production facilities requiring consistent, high-quality crimping of cylindrical cells. The machine supports batch processing to improve throughput and reduce manual handling.
Hinweise zur Konfiguration und zum Betrieb
The crimper requires a pneumatic supply of compressed air between 0.5 and 0.8 MPa; an air compressor is not included and must be sourced separately. If using a gas cylinder instead of an air compressor, a two-stage pressure regulator must be installed to ensure safe operation within the specified pressure range.
Before crimping, the cylindrical battery cases must be grooved at the opening end using a compatible grooving machine such as the MSK-500-AR18650. Each battery cell type requires a specific crimping die; customers should contact the supplier to obtain dies matching their cell specifications.
