KSL1700XMGI8AD 1700°C Max 8-Chamber Box Furnace with Automated Doors and Independent Temperature Control for High-Throughput Heat Treatment
The KSL1700XMGI8AD is designed for laboratories requiring simultaneous heat treatment of multiple samples under precisely controlled conditions. This system integrates eight compact box furnaces, each measuring 120 x 120 x 120 mm, allowing independent temperature control up to 1700°C. This configuration supports high-throughput workflows such as new material discovery and advanced thermal processing where different samples require distinct temperature profiles.
Each chamber features an automated door mechanism controlled via a touchscreen panel, enabling programmed opening and closing sequences for efficient sample loading and unloading. When paired with an optional robotic arm and sample tray station, the furnace system can operate autonomously 24/7, minimizing manual intervention and improving process consistency.
Wichtigste Merkmale
- Eight independent box furnaces integrated into a single compact unit for space and energy efficiency
- Maximum temperature of 1700°C per chamber with continuous operation at 1600°C
- Automated door control programmable through an intuitive touchscreen interface
- PID temperature control with ±1°C accuracy (optional upgrade to ±0.1°C)
- Heating elements made of MoSi2 and B-type thermocouples for reliable high-temperature measurement
- Eight gas inlets located at the rear for controlled atmosphere applications
- Optional robotic arm integration for fully autonomous operation
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Number of Chambers | 8 box furnaces |
| Kammerabmessungen | 120 x 120 x 120 mm (1.7 L capacity) |
| Effective Uniform Heating Zone | 80 x 80 x 80 mm within ±5°C |
| Höchsttemperatur | 1700°C (up to 30 minutes), continuous 1600°C |
| Optional Max Temperature | 1750°C upon request (extra cost) |
| Heating Element | Molybdenum Disilicide (MoSi2) |
| Temperatursensor | B-type thermocouples |
| Temperaturregelung | PID control with touchscreen interface, ±1°C accuracy (optional ±0.1°C) |
| Door Operation | Automated, programmable via touchscreen |
| Leistung | 20 kW |
| Spannung | AC 220V ±10%, single-phase, 50/60 Hz |
| Gas Inlets | 8 inlets at furnace rear |
| Nettogewicht | Approx. 250 lb (113.4 kg) |
Typische Anwendungsbereiche
This multi-chamber furnace is ideal for research and development environments requiring parallel thermal processing of multiple samples, such as new material synthesis, sintering studies, and heat treatment experiments with varied temperature profiles. Its automated door and optional robotic integration support continuous, unattended operation, enhancing throughput and reproducibility.
Hinweise zur Konfiguration und zum Betrieb
- An optional robotic arm and sample tray station can be integrated for fully autonomous operation.
- Users should avoid using flammable, explosive, or toxic gases with this equipment; the manufacturer disclaims responsibility for issues arising from such use.
- The furnace requires a dedicated power source within ±8% voltage variation and should be isolated from equipment generating strong magnetic fields.
- Keep the furnace away from areas prone to liquid splashes and magnetic or conductive powders.
- Normal wear includes insulation cracks and heating element degradation; replacement or repair should be done as needed.
- Temperature fluctuations may occur below 300°C operation.
- Do not open furnace doors when chamber temperature exceeds 500°C to avoid hazards.
Einhaltung der Vorschriften
- CE-zertifiziert
- NRTL certification available at additional cost
