KSL-1200X-BSA Compact Automatic Bottom-Loading Muffle Furnace with 150×155×180 mm Chamber, Programmable Touchscreen Controller, and Up to 1200°C Operation
The KSL-1200X-BSA is engineered to facilitate automated thermal processing of samples in laboratory environments, particularly for materials research and high-throughput workflows. Its compact heating chamber, measuring 150 mm wide by 155 mm deep and 180 mm high (approximately 6″×6″×7″), accommodates sample volumes up to 4.2 liters. The furnace supports continuous operation at temperatures up to 1100°C, with the capability to reach 1200°C for short durations under 30 minutes, enabling a range of heat treatment protocols.
This model incorporates an automated bottom-loading mechanism that raises and lowers the sample stage for loading and unloading, minimizing operator exposure to high temperatures. The furnace chamber closes automatically after sample placement and reopens upon completion of the programmed heating cycle. Temperature control is managed via a touchscreen interface allowing up to 50 programmable segments for heating, dwelling, and cooling, with ±1°C accuracy. Ethernet connectivity via RJ45 enables remote PC control and integration with robotic systems for fully automated laboratory workflows.
Wichtigste Merkmale
- Compact 150×155×180 mm (6″×6″×7″) heating chamber with 4.2 L capacity
- Continuous operation up to 1100°C; short-duration peak to 1200°C (under 30 minutes)
- Automated bottom-loading stage for safe, efficient sample handling
- Touchscreen controller with 50 programmable temperature segments and ±1°C accuracy
- RJ45 Ethernet interface for PC control and robotic integration
- Optional rapid inert-gas cooling system achieving up to 20°C/s cooling rates
- Designed for glovebox compatibility with optional KF40 power cable feedthrough
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Modell | KSL-1200X-BSA |
| Furnace Type | Compact Automatic Bottom-Loading Muffle Furnace |
| Heating Chamber Dimensions (W×L×H) | 150 × 155 × 180 mm (6″×6″×7″) |
| Kammerkapazität | 4.2 L |
| Maximum Continuous Temperature | 1100°C |
| Maximum Short-Duration Temperature | 1200°C (less than 30 minutes) |
| Erwärmungsgeschwindigkeit | 10°C/min |
| Heizelemente | 1300°C-grade resistance heating coil |
| Thermoelement | Typ K |
| Genauigkeit der Temperaturregelung | ±1 °C |
| Furnace Opening Clearance | 140 mm max |
| Eingangsspannung | 110 VAC or 208–240 VAC, single-phase, 50/60 Hz (selected at order) |
| Maximale Leistung | 2.5 kW |
| Control Interface | Touchscreen with 50 programmable segments, RJ45 Ethernet for PC/robotic integration |
| Sample Handling | Automated bottom-loading stage with automatic chamber closing/opening |
| Optional Features | Rapid inert-gas cooling system, KF40 power cable feedthrough, remote PC control, robotic integration |
Typische Anwendungsbereiche
Ideal for automated heat treatment in materials research laboratories, including sintering, annealing, and thermal cycling of small samples. Its compact size and glovebox compatibility make it suitable for controlled atmosphere studies and integration into robotic workflows for high-throughput experimentation.
Hinweise zur Konfiguration und zum Betrieb
The furnace requires installation of a compatible power plug according to local electrical standards; the power cable is included but the plug is not. For glovebox installation, an optional KF40 power cable feedthrough is available. The rapid inert-gas cooling option requires a suitable inert gas supply and is designed to accelerate sample cooling after lowering from the heated chamber. Remote PC control and robotic integration are supported via Ethernet with available communication protocols for automation. Continuous operation should not exceed 1100°C; operation at 1200°C is limited to under 30 minutes to protect furnace components. Verify sample size compatibility with the 140 mm maximum furnace opening clearance before use.
