EHX-365 Economic Hot Laminating Press with Two SS304 Steel Rollers, 365 mm Width, Up to 130°C and 50 kg Pressure
The EHX-365 hot laminating press is engineered for laboratory-scale lamination tasks requiring controlled heat and pressure over a moderate width. It is particularly suited for research involving multilayer liquid crystal polymers (LCP), flexible electronic devices, and solid-state lithium-ion battery components. This model provides a cost-effective solution for applying uniform lamination with precise temperature and force control.
The device operates with two stainless steel (SS304) rollers, each 60 mm in diameter, which are heated by electric rods capable of reaching temperatures up to 130°C. The laminating width accommodates materials up to 365 mm wide, with a maximum lamination speed adjustable between 1 and 5 meters per minute. Pressure is applied via a manually adjustable spring mechanism on the top roller, with a maximum force of approximately 50 kg, monitored by a digital force sensor for accuracy.
Wichtigste Merkmale
- Two SS304 stainless steel rollers with 60 mm diameter for durability and uniform heat transfer.
- Electric heating rods with dual digital temperature controllers, enabling precise temperature control up to 130°C.
- Maximum laminating width of 365 mm suitable for various flexible substrates and films.
- Adjustable lamination speed ranging from 1 to 5 meters per minute for process flexibility.
- Manual pressure adjustment via spring mechanism with digital force sensor feedback, up to ~50 kg force.
- Single-phase power supply compatible with 208-240V, 50/60Hz, 2000W power consumption.
- Optional NRTL or CSA certification available upon request for compliance needs.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Material der Walze | SS304 Stainless Steel |
| Rollendurchmesser | 60 mm |
| Höchsttemperatur | 130°C |
| Temperaturregelung | Two Digital Temperature Controllers |
| Maximum Laminating Width | 365 mm |
| Laminating Speed | 1 to 5 meters/min |
| Maximum Pressure Force | Approximately 50 kg (adjustable) |
| Pressure Adjustment | Manual via Spring Mechanism with Digital Force Sensor |
| Stromversorgung | 208-240V, 50/60Hz, Single Phase, 2000W |
| Zertifizierungen | NRTL or CSA Available Upon Request (Extra Cost) |
Typische Anwendungsbereiche
The EHX-365 is ideal for laboratory research and development involving multilayer liquid crystal polymer films, flexible electronic device fabrication, and solid-state lithium-ion battery assembly. It supports precise lamination processes where controlled heat and pressure are critical to material integrity and performance.
Hinweise zur Konfiguration und zum Betrieb
The pressure between rollers is manually adjusted using a spring mechanism, with force feedback provided by a digital sensor to ensure consistent lamination pressure. The rollers are heated electrically and controlled independently via digital controllers for stable temperature management. Optional certifications such as NRTL or CSA can be requested for compliance with safety standards, which may incur additional costs. Users should ensure proper electrical supply and follow safety guidelines when operating the heated rollers.
