IMCS-1700-MAS Compact Induction Atomizer for High-Temperature Alloy Powder Production up to 1700°C
This compact unit integrates a 25 kW induction power supply capable of reaching melting temperatures up to 1700°C, with a controlled atomizing gas pressure of 1 MPa to produce fine powders generally below 80 microns. Its design allows installation in standard laboratory environments without requiring extensive facility modifications.
Wichtigste Merkmale
- 25 kW induction power supply with frequency fixed between 30-80 kHz and 100% duty cycle for continuous operation.
- Melting chamber constructed from water-cooled SS304 stainless steel maintaining surface temperature below 60°C.
- Special graphite crucible with a unique nozzle design for efficient atomization and sealed to maintain high pressure in the melting chamber.
- Maximum batch capacity of 200 g for Fe-based alloys with included thermocouple sheath and B-type thermocouple for precise temperature control.
- Vacuum casting chamber with KF 25 port enabling vacuum levels down to 50 mTorr using a mechanical pump.
- Programmable temperature controller with 30 segments and automatic PID control ensuring temperature stability within ±5°C.
- Safety features including water interlock, over-temperature and overpower protection, plus a pressure relief valve for the melting chamber.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Stromversorgung | 208-240 VAC, 3 phases, 25 kW, 50/60 Hz (Other voltages available on request) |
| Induction Frequency | 30-80 kHz (non-adjustable) |
| Induction Coil Dimensions | 170 mm inner diameter × 110 mm height, water-cooled |
| Melting Chamber Material | SS304 stainless steel with water cooling jacket |
| Max Melting Temperature | 1700°C (up to 1 hour max) |
| Atomizing Pressure | 1 MPa |
| Crucible Capacity | Max 200 g (Fe-based alloy), graphite crucible OD 80 mm × ID 60 mm × H 160 mm |
| Vacuum Level (Casting Chamber) | 50 mTorr (with mechanical pump) |
| Temperaturregelung | 30-segment programmable PID controller, B-type thermocouple, stability ±5°C |
| Cooling Water Flow | >116 L/min for induction coil cooling |
| Safety Features | Water interlock, over-temperature and overpower protection, pressure relief valve |
Typische Anwendungsbereiche
The IMCS-1700-MAS is ideal for producing spherical metal powders used in additive manufacturing (3D printing), thermal spray coatings, and materials research involving high-temperature alloys. It supports development of powders from Ni-based superalloys, refractory metals, and high-entropy alloys, enabling precise control over particle size and morphology.
Hinweise zur Konfiguration und zum Betrieb
The system includes a high-purity graphite crucible with a specialized nozzle for atomization and a thermocouple sheath. Optional accessories such as crushers, jet mills, and vibrating sieves are recommended to improve powder yield and particle size uniformity by processing larger particles post-atomization.
Operators must use appropriate safety gear including goggles due to the high-pressure operation. The input gas pressure should be regulated below 10 bars to ensure safe atomizing conditions. The equipment requires a cooling water supply exceeding 116 liters per minute to maintain coil temperature.
