MSK-PN110-DS Pneumatic Crimper Decrimper for Disassembling CR20XX Series Coin Cells with Ar Gas Compatibility
The MSK-PN110-DS is engineered to facilitate the precise disassembly of common coin cell batteries, specifically models CR2016, CR2025, and CR2032. This pneumatic crimper utilizes compressed inert gas or air to apply controlled pressure, enabling consistent and repeatable crimping and decrimping operations essential for battery research and development. Its design supports operation within 1000 grade cleanroom environments, making it suitable for sensitive battery assembly and disassembly tasks.
Unlike electric or hydraulic crimpers, the MSK-PN110-DS avoids contamination risks by using gas pressure, which is particularly advantageous when operated inside glove boxes with inert gases such as argon. The device includes a KF40 glove box feedthrough set, allowing seamless connection to inert gas sources while maintaining the glove box atmosphere integrity. This feature is critical for handling highly reactive battery components safely and cleanly.
Wichtigste Merkmale
- Operates with compressed inert gas or air at 0.7 to 1.0 MPa pressure, recommended at 0.9 MPa for optimal performance.
- Provides crimping loads ranging from 160 kg to approximately 1080 kg depending on gas pressure.
- Includes a disassembling die set compatible with CR2016, CR2025, and CR2032 coin cells; optional dies for CR23XX and CR24XX series available.
- Measurement accuracy of ±0.5% full scale ensures precise control over crimping force.
- Equipped with a KF40 glove box feedthrough set and tubing adapters for inert gas connection inside glove boxes.
- Heavy-duty steel construction designed for durability in demanding laboratory environments.
- 1000 grade cleanroom compatible, suitable for contamination-sensitive battery R&D.
Technische Daten
| Parameter | Spezifikation |
|---|---|
| Operation Gas Pressure | 0.7 ~ <1.0 MPa (0.9 MPa recommended; 1.0 MPa maximum) |
| Crimping Load Range | 160 kg to 1080 kg depending on gas pressure |
| Measurement Accuracy | ±0,51 TP3T Skalenendwert |
| Stroke Length | 20 mm |
| Gasverbrauch | 490 ml per stroke |
| Die Set Material | Hardened Steel |
| Output Dimension After Crimping | Original O.D. 19.96 mm increased by +0.15 mm (approx. 20.11 mm) |
| Gas Inlet/Outlet Tubing | 6 mm O.D. tube fittings; includes adapters and tubing for glove box integration |
| Cleanroom Compatibility | 1000 grade cleanroom compatible |
| Structure | Heavy Duty Steel |
Typische Anwendungsbereiche
This pneumatic crimper is ideal for battery research laboratories focused on coin cell assembly and disassembly, particularly for testing and analyzing battery components without contamination. It is well suited for use inside glove boxes with inert atmospheres to maintain sample purity and safety when handling corrosive electrolytes.
Hinweise zur Konfiguration und zum Betrieb
The MSK-PN110-DS includes a disassembling die set for CR20XX series coin cells and a KF40 glove box feedthrough set with tubing adapters for inert gas connection. Optional die sets for other coin cell sizes (CR23XX, CR24XX) can be ordered separately. The device contains no electrical components, enhancing safety and eliminating contamination risks.
Users must supply a compatible air compressor or inert gas tank with pressure regulation within the specified range. When operating inside a glove box, only high purity inert gases such as argon or nitrogen should be used to prevent contamination. The crimping dies require cleaning with ethanol after each use to prevent corrosion from battery electrolytes.
To ensure optimal crimping quality, it is recommended to use MTI branded coin cell cases. Overpressure or operation without workpieces should be avoided to prevent damage to the dies.
